Kenwood HM-333 Stereo System User Manual


 
System connection
13
Preparation section
After plugging the power cord of this unit, press the
POWER (
) key of the remote control unit to turn
the system ON. When the system is turned ON,
press the key of the function to be operated.
Operation
÷ When pressing more than one remote control keys
successively, press the keys securely by leaving an in-
terval of 1 second or more between keys.
÷ The provided batteries are intended for use in operation checking, and their service life may be short.
÷ When the remote controllable distance becomes short, replace both of the batteries with new ones.
÷ If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
Operating range (approx.)
Remote sensor
Loading batteries
1 Remove the cover. 2
Insert batteries.
3 Close the cover.
÷ Insert two R6 ("AA"-size) batteries following the polarity indications.
6 m
FM/AM
6
30˚
30˚
Notes
Notes
Controls and indicators
7 Numeric keys &™
Used to select a CD track number or recall a preset
station of the tuner.
8 PTY/ TIME DISPLAY key (For Europe and U.K.)
*¡§
Used at the time of program type detection.
Press to switch the displayed time information on CD.
TIME DISPLAY key (For other countries)
Press to switch the displayed time information on CD.
DISPLAY key *
Press to switch the display mode of the display
panel.
9 SOUND key %
Press to switch the sound effect to EX.BASS or
LOUD.
TONE key %
Press to adjust the tone.
0 MUTE key %
Press to mute the audio temporarily.