Kenwood HM-333 Stereo System User Manual


 
23
Basic section
Playback of tapeReceiving broadcast station
1 Receive a broadcast.
2 Select "AUTO MEMORY"
(or "AUTO PRESET").
Collective presetting of stations
Main unit only
FM/AM
TUNER
÷ A maximum of 30 stations of the band presently being
received will be preset.
÷ When there are many stations and the intended station
has not been preset, please also use "One-by-one pre-
setting (Manual preset)".
AUTO MEMORY .. For U.K. and Europe
AUTO PRESET ......For other countries
AUTO MEMORY
menu set
/
demo
volume / multi control
\
\
\
\
Channel space setting (Except for U.S.A., Canada, U.K., Europe, Malaysia and Australia)
The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/
FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by
referring to the following table.
CHANNEL
Space Frequency
Area
1
2
USA, Canada and South
American countries
Other countries
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
1 Turn power on.
2 While holding TUNER FM/AM key pressed,
turn the volume/multi control knob to se-
lect "FM 50/AM 9" or "FM100/AM10".
3 Set it.
Each press switches the space frequency alter-
nately.
1 FM 50 kHz, AM 9 kHz
2 FM 100 kHz, AM 10 kHz
FM 50/AM 9
FM100/AM10
FM/AM
TUNER
set
/
demo
volume / multi control
Main unit only