Kenwood C-707I Stereo System User Manual


 
C-707I
72
Setting the Timer
C-707I
Select “PLAY” or “AI PLAY”.
Press the [<] or [>] key.
88
Set the volume.
Press the [<] or [>] key.
99
Press the [ENTER] key.
Select the input source.
Press the [<] or [>] key.
The mode setting cycles as shown below each time you press a key.
1010
If you selected an input source other than “TUNER”, this completes the setting
procedure. The message “COMPLETE” will appear on the display brie y,
followed by the normal display.
If you selected “TUNER”, use the [<] and [>] keys to select a preset number,
and then press the [ENTER] key. This completes the setting procedure.
“COMPLETE” will appear on the display brie y, followed by the normal display.
Playback is at the volume you set in step 9.
You cannot use the [VOLUME] key to set the volume.
Specify the “OFF TIME” (o time).
77
Press the [ENTER] key.
Press the [ENTER] key.
Use the [<] and [>] keys to set the hour.
Use the [<] and [>] keys to set the minutes.
This setting causes the volume to increase
gradually up to the volume level you set in
step 9.
Press the [ENTER] key.
AUX D.AUDIO
TUNER CD iPod
USB
Press the [ENTER] key.
en10_c-707i.indd 72en10_c-707i.indd 72 12/27/2007 10:26:21 AM12/27/2007 10:26:21 AM