Kenwood C-707I Stereo System User Manual


 
48
C-707I
Playing Back from a Digital Audio Player
You can connect a Kenwood digital audio player (referred to hereafter simply as “digital audio player”) to
the system and use it to play tracks.
D.AUDIO
Connect the digital audio player to the [D.AUDIO IN]
terminal on the front panel of the main unit.
11
Use this procedure to connect a digital audio player to the system and play
tracks.
Also refer to the instruction manual that comes with the digital audio player you are
connecting.
Connecting the digital audio player using the dedicated cable allows you to operate
the digital audio player using the main unit or the remote control.
z
z
Compatible Kenwood digital audio players (As of November 2007)
Memory audio player M2GD55, M1GD55, M1GC7, M2GC7
Turn on the digital audio player.
22
Play back from a digital audio player.
33
Always turn this system and the digital audio player o before connecting the
digital audio player.
z
Simply pressing the [D.AUDIOE] key turns on the system and begins
playback.
z
Press the [INPUT SEL.] key.
The source changes as shown below each time you press the key.
Press the [D.AUDIOE] key.
D.AUDIO AUX
en05_c-707i.indd 48en05_c-707i.indd 48 12/26/2007 10:47:35 AM12/26/2007 10:47:35 AM