Filter
Top Products
Safety notes
7
Safety notes
Always observe the VDE safety regulations.
Observe the maximum permissible signal feed-in level.
Neither DC voltage nor low-frequency AC voltage may be applied
to the RF port.
Only use fuses with the same cut-out characteristics.
The unit is live even when not connected.
The unit may only be operated with all shielding covers fitted and
when closed to prevent electromagnetic interference. Only use
suitable shielded cable.
Improper use during mains operation is a risk to life!
Connections
Improperly connected connections can lead to operating faults or
defects in the unit.
Use in accordance with intended purpose
The operator must ensure that
the measuring instrument is only used in accordance with its intended
purpose.
the measuring instrument is only used when in good order and fully
functional.
the safety and warning notes on the measuring instrument are not
removed and remain legible.
Mechanical durability
The MVG 10 is designed for mobile usage and the mechanical
demands associated with this. The MVG 10 should not be exposed to
heavy mechanical stress such as being struck, knocked or dropped as
this can cause damage to the unit.
Electronic equipment must not be disposed of in domestic waste.
According to directive 2002/96/EC OF THE EUROPEAN
PARLIAMENT AND COUNCIL of 27 January 2003 on waste electrical
and electronic equipment, it must be disposed of professionally.
Please take this unit to a public collection point intended for this type
of disposal at the end of its useful life.