Filter
Top Products
Sweep generator
18
Sweep generator
The sweep generator is used to sweep in 10 preset frequency ranges
(measuring profiles). The profiles can be programmed to free ranges
depending on the channel allocation in the cable network, so that
measurement is possible without interrupting or interfering with
programmes. The frequencies and levels can be selected freely.
Only use the sweep generator on free channels so that
programmes and services in the cable network are not
interrupted.
Please use the operating concept on page 2 for help with
understanding the operating sequence.
Function Button actuation Display
Switch on unit when depressed
briefly
The upper display appears first,
then the lower display shortly
afterwards with the last function
that was set
On
Off
Select "Sweep generator"
main function and
show battery charge state
▼ ▲
Confirm selected main function
Show last level set
Menu
Select
Set signal level
W X
- +
Enter signal level directly
plus "Enter"
or
0 9
see above
Enter number of measuring
profile to be pre-programmed,
0 to 9
Incorrect entries are not
accepted.
▼ W X
+
- +
Enter profile directly
plus "Enter"
Incorrect entries are not
accepted!
or
0 9
see above
SweepGenerator..
Accu 100 %
SwG FreqRange
Nr: X
KATHREIN MVG10
NG Store
nr: 0
SwG Level
60.0 dBµV
SwG Level
XX.X dBµV