Filter
Top Products
Noise generator
15
Noise generator
The noise generator is used for measuring cable installations or
sections of cable installations that are not yet occupied with
programming.
It generates a broadband noise to evaluate the frequency response in
the range from 4 MHz to 1 GHz. The bandwidth can be set to 1 MHz
or 7/8 MHz.
Do not use the noise generator if programmes or services are fed
into the cable network and/or if subscribers are connected!
Please use the operating concept on page 2 for help with
understanding the operating sequence.
Function Button actuation Display
Switch on unit when depressed
briefly
The upper display appears first,
then the lower display shortly
afterwards with the last function
that was set
On
Off
Select the "Noise generator"
main function
Show battery charge state
▼ ▲
Confirm selected function
Show last signal level set
Menu
Select
Set signal level
W X
- +
Enter signal level directly
followed by "Enter"
or
0 9
see above
Set bandwidth
1 MHz or 7/8 MHz
▼ W X
+
- +
Store settings in memory at
addresses 0 to 9
▼
Confirm entries
Menu
Select
NoiseGenerator..
Accu 100 %
NG Level
XX.X dBµV
NG Bandwidth
1 MHz (7/8 MHz)
NG Store
Nr: 0
NoiseGenerator..
Accu 100 %
KATHREIN MVG10
NG Store
nr: 0
NG Level
60.0 dBµV