Filter
Top Products
Sweep generator
20
Clear screen presentation on
MSK 33 with "Enter"
▼ X
+ +
+
Command to clear spectrum
received by MSK33
(MVG10 tracking)
▼
Enter control printout number
(up to 3 digits), confirm with
"Enter" and run with "Enter"
X
+ +
+ 0…..9
Command to switch a second
MVG10 to stored position
"Recall 0" via MSK33
(MSK33 and MVG10
connected via SCART)
X
+
Command to switch a second
MVG10 to stored position
"Recall 1" via MSK33
(MSK33 and MVG10
connected via SCART)
X
+
Command to switch the
MSK33 video signal from
internal graphics to ext. CVBS.
The respective signals are
relayed to the MVG10 via the
SCART socket for modulation.
X
+
Command to switch the
MSK33 video signal from
ext. CVBS to internal graphics.
The respective signals are
relayed to the MVG10 via the
SCART socket for modulation.
X
+
Store settings in memory at
addresses 0 to 9
▼
Confirm entries
SwG ControlData
Clear no run
SwG ControlData
Clear no run/run
SwG ControlData
Prt XXX no run
SwG ControlData
Fkt A 0 no run
SwG ControlData
Fkt A 1 no run
SwG ControlData
Fkt B 1 no run
SwG ControlData
Fkt B 0 no run
SwG Store
nr: 0
ChannelSweep...
Accu 100 %