Filter
Top Products
4
Digital Optical and Coaxial Cable Connections
Optical Cable Input/Output Terminals
• Connect a receiver or amplifier with digital audio capability via
the optical Input/Output cables. A single cable transmits stereo
signals (L/R channels) as digital data.
• If analog audio connections are also being made, try using the
digital connectors on the receiver/amplifier that are labeled
digital terminals on the receiver or amplifier that are labeled the
same way as the analog terminals.
• Make sure the optical cable (not supplied) can be connected to
the amplifier, etc. before purchasing it.
• Do not bend the optical cable at a sharp angle.
• The filament in the cable shines red when activated. This beam
sends the digital signal. It is not harmful to the eyes.
Notes
• Connect an external digital recording device to the digital out-
put terminal on an amplifier or receiver, and then connect the
amplifier or receiver to this unit.
• The sound from an external device cannot be digitally output
from this unit. To listen to the sound from the external device,
connect an amplifier or receiver to the LINE OUT (PLAY) ter-
minal on this unit.
• Depending on the device, a digital device is connected to the
DIGITAL OUT terminal of this unit may not correctly recog-
nize this unit (UNLOCKED appears in the display of the
attached device.) If this happens, press the PLAY 3 button on
this unit to check that the unit it is being recognized by the
attached device.
Digital Connections
COMPU LINK
-
4
(SYNCHRO)
DIGITAL IN
COAXIAL OPTICAL
DIGITAL OUT AC IN
MODE
CDR TD
COAXIAL OPTICAL
LINE
IN
REC
( )
OUT
PLAY
LL
RR
( )
Optical digital cable
(not supplied)
Receiver or amplifier with
digital optical/coaxial terminal
Optical digital cable
(not supplied)
To OPTICAL INPUT
terminal
How to use optical terminals for connections
1
Check that the end of the optical digital cable is
not dirty, and insert it securely.
Coaxial Cable Terminals
• Coaxial Input/Output terminals are provided on the XL-R2010
for enhanced connectivity. Simply connect the corresponding
Input/Output terminals of other components using coaxial
cables for fast, easy data transfer.
Input signal
Main Unit
CD player, etc.
To OPTICAL OUTPUT
terminal
Output signal
Coaxial digital cable
(not supplied)
Coaxial digital cable
(not supplied)
To COAXIAL OUTPUT
terminal
To COAXIAL INPUT
terminal
Eng.book Page 4 Monday, May 28, 2001 9:46 AM