Filter
Top Products
27
English
• If tracks have already been programmed for the CDs, “LAST P-
PG OK?” is shown in the information display. Press the SET
button on either the remote control or the main unit or press the
PLAY button on the main unit to record the same programmed
tracks.
Recording starts.
To program new tracks, press the CANCEL button and then
proceed to step 4.
• If you press the CANCEL button, the playing time remaining
time on the CD-R or CD-RW disc in the CDR is shown in the
information display.
4
Select and enter a track number.
• After the track is entered, the amount of time remaining on the
CD-R or CD-RW disc is shown in the information display.
5
Repeat Step 4 to continue programming tracks.
• Up to 32 steps can be programmed. The same track may be pro-
grammed more than once.
• Programming ends when 32 steps have been registered or if
there is no more time remaining on the CD-R or CD-RW.
6
Press the CDR Control PLAY 3 or ¶ REC/REC
MUTING button on the main unit or the 3 (play)
or ¶ REC/REC MUTING button on the remote
control.
When “ADD FINALIZE?” is shown in the information
window:
• No response (no input) assumes that finalization is to be per-
formed, or you can press the SET button (main unit/remote con-
trol) to confirm that finalization is to be done. Press the
CANCEL button (main unit/remote control) to keep the disc
unfinalized.
Note
• This message will not be shown if the menu FINALIZE func-
tion setting is “OFF”. The default setting is “ON”.
• When a blank disc is in the CDR tray, "UPDATE OPC" is
shown following "ADD FINALIZE?".
The recording process starts.
• Only the tracks selected from the CDs in the CD player are
recorded.
• Playback starts from the first track seleted. The playing time of
the track and the remaining playing time of the CD-R or CD-
RW disc are shown in the information display.
• As high-speed recording is performed (CD-R 4x, CD-RW 2x),
there is no audio output during the recording process.
When recording completes
"STOP DUBBING" flashes and recording automatically stops.
When recorded without canceling "ADD FINALIZE?"
"FINALIZE" is shown in the information window after recording is
stopped and finalization is automatically performed.
To stop the recording at any time
Press the CD Control STOP 7, CDR Control STOP 7 or CANCEL
button on the main unit or the 7 (stop) or CANCEL button on the
remote control to stop the recording process. The recording mode
is released after “STOP DUBBING” is shown in the information
display.
• There are a number of advantages of having a CD player and
CDR in the same unit, mainly that the unit has direct control
over both components. Because of this, the following recording
options are available: normal dubbing, high-speed dubbing (4x
for CD-R and 2x for CD-RW discs) and track spacing.
SET
MULTI JOG / REC LEVEL
+
–
1. Select the track.
2. Enter the selection.
CD player to CDR Recording
Options
Eng.book Page 27 Monday, May 28, 2001 9:46 AM