Filter
Top Products
9
English
To turn power to the unit on
Press the STANDBY/ON button on the front panel or remote
control.
• The currently selected CD function is shown in the information
display.
To put the unit in standby mode during operation
Press the STANDBY/ON button on the front panel or remote
control.
• The unit can be put into the standby mode by pressing the
STANDBY/ON button.
If the STANDBY/ON button is pressed during a recording
operation, the standby lamp flashes while the unit brings the opera-
tion to an end. Once the operation has stopped, the unit enters the
standby mode and the standby lamp lights steady. From the time
the button is pressed until the standby lamp lights steady, the unit
will not respond to any button pressed on the front panel of the
main unit or remote control.
Turning the power on by pressing a function
button when the unit is in the standby mode
The unit can be turned on and a function selected simply by press-
ing one of the buttons shown in the figure below
• When the PLAY 3 button for either the CD control or CDR
control is pressed on the main unit, the power is turned on. If a
disc is loaded in the tray, playback begins.
• When one of the CD control OPEN/CLOSE 0 buttons or the
CDR control OPEN/CLOSE 0 button is pressed, the power is
turned on and the tray opens, but the currently selected function
(CD player or CDR) does not change.
• When the 3 (play) button on the remote control is pressed, the
power is turned on, the last selected function (CD player or
CDR) is recalled. If a disc is loaded in the tray, playback begins.
• When the power is turned off, the Play mode returns to normal.
• If the power cord is unplugged from the wall , the main unit will
reset to the factory default settings.
Turning the Power On and
Standby Mode
STANDBY
STANDBY/ON
MAXMIN
LEVEL
PHONES
PLAY MODE CD EDIT
REC SOURCE
SELECTOR
CD REC
STOP PLAY PAUSE
REC SOURCE
DIGITAL CD LINE MIC
OPEN/CLOSEOPEN/CLOSE
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
CANCELSETMENU
PAUSE
REC/REC MUTING
PLAYSTOP
SYNCHRO
FINALIZE
MULTI JOG/REC LEVEL
+
–
MIX BLANCE
CD
LINE
LINE
MIC
MIC
STANDBY/ON
CD REC
PLAY
MODE
•
REC
REC MUTING
REC
SOURCE
MENU
PITCH
0
C
H
A
N
C
E
L
REPEAT CD
PITCH
+
SET
PITCH–
RM
–
SXLR2010A
REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10
+
10
FAD E SYNCHRO
CONTROL
STANDBY/ON ( )
STANDBY/ON ( )
3
3
00
STANDBY/ON
Lamp goes out.
Main Unit
Remote Control
STANDBY
STANDBY/ON
Lamp lights
Main Unit
Remote Control
STANDBY/ON
STANDBY
STANDBY/ON
Function Operation
Main unit
(CD control)
CD player
The function is set to CD
player. The CD indicator is
shown in the display window.
Main unit
(CDR control)
CDR
The function is set to CDR.
The CDR indicator is shown in
the display window.
Eng.book Page 9 Monday, May 28, 2001 9:46 AM