Filter
Top Products
43
■ Operating other Manufacturers’
Equipment
By changing the transmittable signals, you can use the
remote control supplied for this unit to operate other
manufacturers’ equipment.
• Refer also to the manuals supplied for the other products.
• To operate these components with the remote control, first you
need to set the manufacturer’s code each for DVD player,
STB, VCR, and TV.
• After replacing batteries of the remote control, set the
manufactures’ codes again.
❏ To change the transmittable signals for operating a
DVD player
1. Press and hold DVD .
2. Press DVD.
3. Enter manufacturer’s code using buttons 1–9, and 0.
4. Release DVD
.
Now, you can perform the following operations on the DVD
player.
DVD : Turn on or off the DVD player.
PLAY : Start playback.
STOP : Stop playback.
PAUSE : Pause playback. To release it, press PLAY.
¢ : Skip to the beginning of the next track.
4 : Return to the beginning of the current
(or previous) track.
❏ To change the transmittable signals for operating an
STB
1. Press and hold STB .
2. Press STB.
3. Enter manufacturer’s code using buttons 1–9, and 0.
4. Release STB
.
Now, you can perform the following operations on the STB.
STB : Turn on or off the STB.
CHANNEL +/– : Change the channels.
1 – 10, 0, +10 (+100) : Select the channels.
Note:
Refer to the manual supplied with your STB.
5. Try to operate your STB by pressing STB .
When your STB turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of STB,
try each one until the correct one is entered.
Manufacturer Codes
JVC 01, 02
AMSTRAD 03 – 06, 33
BT 01
CANAL STELLITE 22
CANAL + 22
D – BOX 26
ECHOSTAR 19 – 21, 23
FINLUX 11
FORCE 30
GALAXIS 29
GRUNDIG 07, 08
HIRSCHMANN 07, 19, 39
ITT NOKIA 11
JERROLD 16
KATHREIN 13, 14, 36
LUXOR 11
MASCOM 34
MASPRO 13
NOKIA 26, 28, 35
PACE 10, 27, 33
PANASONIC 15
PHILIPS 09, 25
RFT 12
SABA 37
SAGEM 24, 31
SALORA 11
SELECTOR 31
SKYMASTER 12, 38
THOMSON 37
TPS 24
TRIAX 32
VIDEOWAY 17, 18
WISI 07
Manufacturers’ codes for STB
5. Try to operate your DVD player by pressing
DVD
.
When your DVD player turns on or off, you have entered the
correct code.
Note:
For detailed menu operations, refer to the instructions
supplied with the discs or the DVD player.
After pressing DVD MENU when setting RDS/DVD
MENU selector to “DVD MENU, ” these buttons can be
used for the DVD menu operations.
EON
DISPLAY MODE
EON SELECT
PTY( PTY9
RDS
DVD
MENU
PTY SEARCH
DVD MENU
ENTER
Manufacturers’ codes for DVD player
Manufacturer Codes
JVC 01
PANASONIC 02
PHILIPS 07
PIONEER 03
SONY 05
TOSHIBA 04
YAMAHA 06
Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
Mastering Remote Operations
EN40-46.RX-E100RSL[B]_4 01.3.7, 8:34 PM43