JVC RX-D411S/RX-D412B Stereo Receiver User Manual


 
Specifications
7 Amplifier
Output Power
At stereo operation:
Front channels: 110 W per channel, min. RMS, driven into 6 Ω at 20 Hz to 20 kHz with no more than
0.8% total harmonic distortion.
At surround operation:
Front channels: 110 W per channel, min. RMS, driven into 6  at 1 kHz with no more than 0.8% total
harmonic distortion.
Center channel: 110 W, min. RMS, driven into 6  at 1 kHz, with no more than 0.8% total harmonic
distortion.
Surround channels: 110 W per channel, min. RMS, driven into 6  at 1 kHz, with no more than 0.8% total
harmonic distortion.
Surround back channels: 110 W per channel, min. RMS, driven into 6  at 1 kHz, with no more than 0.8% total
harmonic distortion.
Audio
Audio Input Sensitivity/Impedance:
DVR/DVD, VCR, DBS, TV: 300 mV/47 k
Audio Input (DIGITAL IN)*:
Coaxial: DIGITAL IN 1(DVR/DVD): 0.5 V(p-p)/75 
Optical: DIGITAL IN 2(DBS), 3(VCR): –21 dBm to –15 dBm (660 nm ±30 nm)
USB: USB
* Corresponding to Linear PCM, Dolby Digital, and DTS (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
DVR, VCR: 300 mV
Signal-to-Noise Ratio (’66 IHF/’78 IHF): 80 dB/70 dB
Frequency Response (6 ): 20 Hz to 20 kHz (±1 dB)
Bass Boost: +4 dB ±1 dB at 100 Hz
Equalization (at DSP operation):
Center frequency: 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz
Control range: ±8 dB
Video
Video Input Sensitivity/Impedance:
Composite video: DVR/DVD, VCR, DBS: 1 V(p-p)/75 
S-video: DVR/DVD, VCR, DBS:
Y (luminance): 1 V(p-p)/75 
C (chrominance, burst): 0.286 V(p-p)/75 
Component: DVR/DVD, VCR (DBS):
Y (luminance): 1 V(p-p)/75 
P
B, PR: 0.7 V(p-p)/75 
Video Output Level/Impedance:
Composite video: DVR, VCR, MONITOR OUT: 1 V(p-p)/75 
S-video: DVR, VCR, MONITOR OUT:
Y (luminance): 1 V(p-p)/75 
C (chrominance, burst): 0.286 V(p-p)/75 
Component: MONITOR OUT:
Y (luminance): 1 V(p-p)/75 
P
B, PR: 0.7 V(p-p)/75 
Synchronization: Negative
Designs and specifications are subject to change without
notice.
54