Filter
Top Products
To change the transmittable signals for operating a CATV
converter or DBS tuner
1 Press and hold DBS/CATV .
• Keep the button pressed until step 3 is finished.
2 Press DBS.
3 Enter the manufacturer code using the
numeric buttons (1 – 9, 0).
See “Manufacturer codes for CATV converter” or
“Manufacturer codes for DBS tuner” below.
4 Release DBS/CATV .
Now, you can perform the following operation on the
CATV converter or DBS tuner:
DBS/CATV
:
Turn on or off the CATV converter or
DBS tuner.
After pressing DBS, you can perform the following
operations on the CATV converter or DBS tuner:
CHANNEL +/–: Change the channel numbers on the
CATV converter or DBS tuner.
1 – 10, 0: Select the channel numbers on the
CATV converter or DBS tuner.
See the manual supplied with the CATV converter or DBS
tuner for details.
5 Try to operate your CATV converter or
DBS tuner by pressing DBS/CATV
.
When your CATV converter or DBS tuner turns on or off,
you have entered the correct code.
If more than one code is listed for your brand of CATV
converter or DBS tuner, try each one until the correct one is
entered.
Manufacturer codes for CATV converter:
Manufacturer Codes
G.I. 01
Gemini 02
Hamlin 03, 04, 05, 06
Jerrold 07, 08, 09, 10, 11, 12, 13, 14, 15
Macom 16, 17, 18
Magnavox 19
Oak 20, 21, 22
Panasonic 23, 24
Philips 25, 26, 27, 28, 29, 30
Pioneer 31, 32
S. Atlanta 33, 34, 35
Samsung 36
Tocom 37
Zenith 38, 39
Manufacturer codes for DBS tuner:
Manufacturer Codes
Echostar 40
G.I. 41
Hitachi 42
Hughes 43
Panasonic 44
Primestar 45
RCA 46
Sony 47
Toshiba 48
Initial setting: 01
To change the transmittable signals for operating a DVD
player
1 Set the mode selector to “DVD.”
2 Press and hold DVR/DVD .
• Keep the button pressed until step 4 is finished.
3 Press DVR/DVD.
4 Enter the manufacturer code using the
numeric buttons (1 – 9, 0).
See “Manufacturer codes for DVD player” below.
5 Release DVR/DVD .
Now, you can perform the following operations on the
DVD player:
DVR/DVD
:
Turn on or off the DVD player.
3: Start playback.
¢:
Skip to the beginning of the next
chapter (or fast-forward for some
models).
4:
Return to the beginning of the
current chapter (or fast-reverse for
some models).
7: Stop playback.
8: Pause playback. To release it, press 3.
MENU: Display the menu recorded on DVD
VIDEO discs.
5/∞/3/2: Select an item on the menu screen.
SET: Enter the selected item.
1 – 9, 0, h10: Select the chapter number.
See the manual supplied with the DVD player for details.
6 Try to operate your DVD player by
pressing DVR/DVD
.
Your DVD player turns on or off when you have entered
the correct code.
Manufacturer codes for DVD player:
Manufacturer Codes
JVC 01
Hitachi 02
Kenwood 03, 04
Magnavox 05
Marantz 06
Mitsubishi 07
Onkyo 08, 09
Panasonic 10
Philips 06
Pioneer 11
Proscan 12
RCA 12
Samsung 13
Sony 14
Toshiba 05
Yamaha 15
Zenith 05, 16
Initial setting: 01
NOTE
You cannot use this remote control to operate any manufacturers’
DVD recorders other than JVC’s.
Manufacturer codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
51