Filter
Top Products
Page 43
English
FUNCTIONS:
This remote control system allows you to use five functions listed below.
Note:
Refer also to the manuals supplied with your video components.
7 Remote Control of the TV through the Remote Sensor on the Receiver
You can control the TV through the remote sensor on the receiver using this remote control.
For details, see page 47.
Note:
Aim the remote control directly at the remote sensor on the receiver when operating the TV. (However, to
operate the VCR or DVD player, always aim the remote control directly at the remote sensor on the VCR or
on the DVD player.)
7 One-Touch Video Play
Simply by inserting a video cassette without its safety tab into the VCR1 (the VCR connected to the VCR1
jacks), you can enjoy the video playback without setting other switches manually.
The receiver automatically turns on and changes the source to “VCR1.”
The TV automatically turns on and changes the input mode to the position you can view the VCR playback.
When you insert a video cassette with its safety tab, press the play (
33
33
3) button on the VCR1 or on the remote
control. So, you can get the same result.
Note:
When you connect an S-VHS VCR or the DVD player as described on page 42, you cannot see the on-screen
displays (such as Visual Confirmation and Menus) since the AV COMPU LINK Remote Control System
automatically changes the TV input mode to “Video input 1” when you operate the S-VHS VCR or the DVD
player.
If you do not mind stopping watching the picture, you can then show the on-screen displays after changing
the TV input mode to the position (Video input 2) the receiver is connected to.
7 One-Touch DVD Play
Simply by starting playback on the DVD player, you can enjoy the DVD playback without setting other
switches manually.
The receiver automatically turns on and changes the source to “DVD” or “DVDMULTI” — DVD playback
mode is automatically selected when a disc played in stereo or the audio output setting of the DVD player is
mixed to two front channels, while DVD MULTI playback mode is automatically selected when a disc played
back using the analog discrete output mode on the DVD player.
The TV automatically turns on and changes the input mode to the position so that you can view the playback
picture.
7 Automatic Selection of TV’s Input Mode
• When you select “TV SOUND” as the source to play on the receiver, the TV automatically changes the input
mode to the TV tuner so that you can watch TV.
• When you select “VIDEO1,” “VIDEO2,” or “TAPE/VCR” as the source to play on the receiver, the TV
automatically changes the input mode to the Video Input 2 so that you can watch the playback picture.
• When you select “DVD,” “DVDMULTI,” or “VCR1” as the source to play on the receiver, the TV
automatically changes the input mode to the correct position (either Video Input 1 or 2) so that you can watch
the playback picture.
Note:
When you select “TV SOUND” as the source on the receiver, you cannot see the on-screen displays (such as
Visual Confirmation and the menu function) since the AV COMPU LINK remote control system automatically
changes the TV input mode to the TV tuner.
If you do not mind stopping listening to the TV sounds, you can then show the on-screen displays after changing
the TV input mode to the position (Video input 2) the receiver is connected to.
7 Automatic Power On/Off
The TV, VCR1 (the VCR connected to the VCR1 jacks), and DVD player turn on and off along with the
receiver.
When you turn on the receiver;
• If the previously selected source is “VCR1”, the TV and VCR1 will turn on automatically.
• If the previously selected source is “VIDEO1,” “VIDEO2,” or “TV SOUND,” only the TV will turn on
automatically.
• If the previously selected source is “DVD” or “DVDMULTI,” the TV and DVD player will turn on
automatically.
When you turn off the receiver, the TV, VCR1 and DVD player will turn off.
Note:
If you turn off the receiver while recording on the VCR1, the VCR1 will not turn off, but continue recording.
EN37-43.RX-80P[UF]/f 98.8.31, 1:52 PM43