Filter
Top Products
Page 17
English
Selecting the Center Speaker Size
You can register the information on the center speaker after all connections are completed.
If you do this registration first, you do not have to adjust the center speaker mode when you want to activate
the surround sound. However, to register the information, first you have to turn on the surround mode. (You
cannot select the center speaker size when the surround mode is off.)
On the front panel only:
1. Press DAP/SURROUND MODE so that the Control % / fi / @ / # buttons work for selecting
the DAP/surround mode.
The lamp next to the button lights up.
2. Press Control @ / # until the SURROUND indicator lights up on the display.
3. Press SETTING so that the Control % / fi / @ / # buttons work for selecting the center speaker
size.
The lamp next to the button lights up.
4. Press Control % / fi until “CNTR SPK” (Center Speaker) appears on the display.
5. Press Control @ / # to select the appropriate item about your center speaker.
Each time you press the button, the display changes to show the following:
LARGE: Select this mode when the size of the center speaker is the same as that of the
front speakers.
SMALL: Select this mode when the size of the center speaker is smaller than that of the
front speakers.
NO: Select this mode when you do not use a center speaker.
(You cannot select this mode when “3CHLOGIC” is selected for the surround
mode.)
Note:
This center speaker size setting is so related to the center mode setting for the surround mode that changing
this setting affects and changes the center mode to a relevant mode, and vice versa.
For example;
• If you select “LARGE,” the center mode is automatically set to “WIDE,” and vice versa.
• If you select “SMALL,” the center mode is automatically set to “NORMAL,” and vice versa.
• If you select “NO,” the center mode is automatically set to “PHANTOM” for Pro Logic and Theater
Surround, and vice versa.
MENU
See also
page 38.
DAP/SURROUND MODE
SETTING
Front panel
LARGE SMALL NO
EN01-25.RX-80P[UF]/f 98.8.31, 1:28 PM17