Filter
Top Products
Page 22
English
From the remote control:
1. Press FM/AM.
Each time you press the button, the band alternates between FM and AM.
2. Press 10 keys to select a preset channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10, then 10.
Note:
When you use the 10 keys on the remote control, be sure that they are activated for tuner, not for the CD
and others. (See page 44.)
Selecting the FM Reception Mode
You can change the FM reception mode while listening an FM broadcast.
You can also store the FM reception mode for each preset station. (See page 21.)
On the front panel:
1. Press TUNER so that the Control % / fi / @ / # buttons work for tuner settings.
The lamp next to the button lights up.
2. Press Control % / fi until “FM MODE” appears on the display.
3. Press Control @ / # to select either “AUTO” or “MONO.”
• Normally select “AUTO.”
• When an FM stereo broadcast is hard to receive or noisy, select “MONO.”
AUTO: When a program is broadcast in stereo, you will hear stereo sound; when in
monaural, you will hear monaural sounds. This mode is also useful to suppress
static noise between stations.
The MUTE AUTO indicator lights up on the display.
MONO: Reception will be improved although you will lose the stereo effect. In this
mode, you will hear noise while tuning into the stations.
The MUTE AUTO indicator goes off on the display.
From the remote control:
Press FM MODE/MUTING.
Each time you press the button, “AUTO” and “MONO” is alternately selected, and appears on the
display.
Note:
When using the FM MODE/MUTING button, be sure that the 10 keys are activated for tuner, not for the CD
and others. (See page 44.)
MEMORYTUNER
Front panel
FM MODE/MUTING
0
DAP MODE
Remote Control
MENU
See also
page 39.
FM/AM
TEST
(REAR R)
REAR (L)
SEA MODE DAP MODE SURR MODE
546
213
87/P 9
0
+10
10
CNTRDELAY
MENU
ENTER
EFFECT
FM MODE/MUTINGRETURN
Remote Control
EN01-25.RX-80P[UF]/f 98.8.31, 1:28 PM22