Filter
Top Products
54
To change the transmittable signals for
operating a DVD player
1. Press and hold AUDIO POWER.
2 Press DVD.
3. Enter manufacturer’s code using buttons 1–9,
and 0.
See the following list to find the code.
4. Release AUDIO POWER.
After pressing DVD or DVD MULTI, you can perform the
following operations on a DVD player:
3 PLAY: Starts playing.
4: Returns to the beginning of the
current (or previous) track.
¢: Skips to the beginning of the next
track.
7 STOP: Stops playing.
8 PAUSE: Stops playing temporarily. To release
it, press 3 PLAY.
After pressing DVD, these buttons
can be used for the DVD menu
operations.
Note:
For detailed menu operations, refer to
the instructions supplied with the discs
or the DVD player.
Note:
Refer to the manual supplied with your DVD player.
5. Try to operate your DVD player by pressing one
of the above buttons.
• DO NOT forget to turn on the DVD player before pressing
one of the above buttons.
If there are more than one code listed for your brand of
DVD, try each one until the correct one is entered.
EFFECT
TEST CTR TONE
∗L/R BAL
23
456
8
MENU
ENTER
ROOM
SIZE
LIVENESS
Manufacturer Codes
JVC 00, 26, 27, 28, 29, 58
AIWA 01, 02
BELL & HOWELL 03
BLAUPUNKT 04, 05
CGM 06, 07
EMERSON 08, 10, 11, 12, 64, 65
FISHER 03, 14, 15, 16, 17
FUNAI 01
GE 18, 19, 20
GOLDSTAR 07
GOODMANS 13, 21
GRUNDIG 06, 22
HITACHI 18, 23, 24, 25, 66
LOEWE 07, 21
MAGNAVOX 04, 19, 24
MITSUBISHI 30, 31, 32, 33, 34, 35
NEC 26, 27
NOKIA 03, 36
NORDMENDE 38
ORION 09
PANASONIC 19, 24, 39, 40
PHILIPS 04, 19, 21, 24, 41, 42
PHONOLA 21
RCA/PROSCAN 04, 18, 19, 23, 24, 43, 44, 45
SABA 38, 46
SAMSUNG 45, 47, 59, 61, 62, 63
SANYO 03, 48, 49
SHARP 37, 50
SIEMENS 03, 51
SONY 52, 53, 54
TELEFUNKEN 55, 60
TOSHIBA 43, 44
ZENITH 56, 57
Manufacturers’ codes are subject to change without notice.
If they are changed, this remote control cannot operate the
equipment.
Manufacturer Codes
JVC 00, 02
DENON 01
PANASONIC 03
PHILIPS 13
PIONEER 04, 05, 06
RCA 07
SAMSUNG 08
SONY 09
TOSHIBA 10
YAMAHA 11, 12
Manufacturers’ codes are subject to change without notice.
If they are changed, this remote control cannot operate the
equipment.
EN47_58.RX-8010V[J]_f 01.1.11, 9:11 PM54