JVC MX-V608T Stereo System User Manual


 
30
English
Special Plays for a Video CD
You can use the following special play modes for video CDs both with and without PBC function. The
following functions can only be executed with the buttons on the remote control.
Frame-by-Frame Playback —————————————————
Press 8 STILL during playback.
When you press the button first, play pauses and you see a still picture on the TV screen. Then each time
you press the button, still pictures advance by one frame.
During frame-by-frame playback, no sound comes out.
To resume normal playback, press 3 on the CD control section.
Viewing Operating Status —————————————————
Usually, the following information of the track being played are shown on the TV screen during playback:
the disc number, the track number, and the playing time.
Press ON SCREEN (3) while pressing down SHIFT A.
Each time you press the buttons, the display of operation status turns on and off.
When the display of operation status turns on, the following information of the track being played appear
on the TV screen briefly: CD play mode, karaoke mode, echo effect, and key control.
The TV screen will show the below :
To cancel the display of operation status, press ON SCREEN (3) while pressing down SHIFT A
again. “DISP. OFF” appears on the TV screen briefly, and all the information about the track being played
disappear.
Viewing the Video Intro of a Video CD ——————————
You can view the contents of a video CD, watching first 5 seconds of each track on the video CD. For a
video CD with PBC, cancel the PBC function referring to page 25.
1. Press DISC 1-3 for the disc you want to view the video intro of.
Playback starts.
2. Press V.INTRO (6) while pressing down SHIFT A after a picture
appears on the TV screen.
The video intro play starts and shows in sequence, the first 5 seconds of nine tracks on the TV screen.
If the CD consists of more than 9 tracks, tracks above 9 will be shown after the first 9 tracks are
shown.
TV screen will show the below:
3. Press the number button for the video intro you want to select.
Playback starts from the selected track.
To stop and cancel the video intro play, press 7 RETURN.
NORMAL
REPEAT
ECHO
STILL
SHIFT A
DISC 1 DISC 2 DISC 3
SHIFT A
+
+
ONSCREEN
TEST TONE
CENTER MODE
DELAY TIME
L BALANCE R
CENTER
LEVEL
3CH LOGICPRO LOGIC
V.INTRO
–+
REAR
LEVEL
–+
HIGHLIGHT
ON SCREEN
V.INTRO
1
2
3
4
5
6
7
8
9
VIDEO INTRO
EN21-31.CA-V908T[U]/f 98.7.22, 8:05 PM30