Filter
Top Products
28
English
3. Press the number buttons (1 to 10 and +10) to select the tracks.
The indications on the display stop flashing and remains lit.
The selected track numbers light up and the step number appears on the display.
• Example: For track 5, press 5.
For track 15, press +10 then 5.
For track 20, press +10 then 10.
For track 32, press +10 three times, then 2.
4. Repeat steps 2 to 3 to select the other tracks for the program.
5. Press 3 on the CD Player control section.
The Unit plays the tracks in the order you have programed them.
If you try to program a 33rd track, “FULL” will appear on the display to let you know that the
program is full.
If you try to program a disc tray that is empty, or a track number that does not exist on a disc (for
example, selecting track 14 on a disc that only has 12 tracks), the selected disc or track are skipped
when the program is played.
You can skip to a particular program step by pressing 4 or ¢ on the MULTI CONTROL during
program play.
To play the programed tracks repeatedly, press REPEAT. For details, refer to “Repeating a Track or
the Discs” on page 29.
To stop playing, press 7 STOP (or 7 on the CD Player control section on the remote control) once.
To delete all the tracks in a program, press 7 STOP (or 7 on the CD Player control section on the
remote control) while the CD Player is stopped. The program is deleted and “PROGRAM” appears on the
display.
To cancel program play, press 7 STOP (or 7 on the CD Player control section on the remote control)
while “PROGRAM” is shown on the display.
Checking the Program ———————————————————
While the CD Player is stopped, use 4 or ¢ on the remote control to check the contents of the
program.
Each time you press ¢, the program contents are shown on the display in the programed order. Pressing
4 displays the previous step in the program.
Changing the Program ———————————————————
Modify the contents of a program while the CD Player is stopped.
Press CANCEL/DEMO on the Unit, the last step in the program is deleted.
Each time you press the button, the last step listed in the program is deleted from the program.
To add a step to the program, follow the procedure above (on either the Unit or the remote control).
The new steps are added to the end of the program.
Random Play
The tracks of all loaded CDs will play at random.
1. Press PROGRAM/RANDOM on the Unit
while the CD Player is stopped to
change to the Random Mode display.
Each time you press the button, play mode changes as follows:
= PROGRAM = RANDOM = No Play mode indicator (Continuous Play) = (back to the
beginning)
2. Press CD £/8 (or 3 on the CD control section on the remote
control).
The tracks of all the CDs are played in random order.
When all of the tracks have been played, the CD Player stops.
Note: Random Play cannot be activated with the DISC (1-3) buttons and the number keys.
You can skip to the next track by pressing ¢ on the MULTI CONTROL during Random Play. Each
time you press the button, the next track is jumped to. (You cannot skip to the previous tracks, nor to the
beginning of the current track during Random Play.)
To continue with a different random track selection after the last track is played, press REPEAT to
select REPEAT ALL before or during Random Play.
SELECT
ONSCREEN
TEST TONE
CENTER MODE
DELAY TIME
L BALANCE R
CENTER
LEVEL
3CH LOGICPRO LOGIC
V.INTRO
–+
REAR
LEVEL
–+
HIGHLIGHT
NEXT
PREV
PROGRAM
/RANDOM
EN21-31.CA-V908T[U]/f 98.7.22, 8:05 PM28