Filter
Top Products
32
2 Press MEMORY (
•
REC).
The channel number position starts flashing on the
display window for about 5 seconds.
3 Press Number button(s) (1-10, +10) to select a
channel number while the channel number
position is flashing.
The channel number and the CH indicator start flashing.
Examples:
• For channel number 3, press 3.
• For channel number 14, press +10 then 4.
(For FM stations only)
• For channel number 24, press +10, +10, then 4.
• For channel number 30, press +10, +10, then 10.
4 Press MEMORY (
•
REC) again while the
selected number is flashing on the display
window.
The selected number stops flashing.
The station is assigned to the selected preset number.
5 Repeat steps 1 to 4 until you store all the
stations you want.
To erase a stored preset station
Storing a new station on a used number erases the previously
stored one.
7 To tune in to a preset station
From the remote control ONLY:
1 Press FM/AM repeatedly to select the band.
Each time you press the button, the band alternates
between FM and AM (MW).
2 Press Number button(s) (1-10, +10) to select a
preset channel number.
Examples:
• For channel number 3, press 3.
• For channel number 14, press +10 then 4.
(For FM stations only)
• For channel number 24, press +10, +10, then 4.
• For channel number 30, press +10, +10, then 10.
Selecting the FM reception
mode
When a stereo FM program tuned in currently is noisy, you
can change the FM reception mode to improve the reception.
• You can store the FM reception mode for each preset
station. See “Using preset tuning” on page 31.
From the remote control ONLY:
Press FM MODE (0) while listening to an FM
station.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode
alternates between “AUTO MUTING” and “MONO.”
• AUTO MUTING:
When a program is broadcasted in stereo, you will hear
stereo sounds. (The STEREO indicator lights up on the
display window.) When in monaural, you will hear monaural
sounds. This mode is also useful to suppress static noise
between stations. The AUTO MUTING indicator lights up on
the display window.
• MONO:
Reception will be improved although you will lose the
stereo effect. (The STEREO indicator goes off.) In this
mode, you will hear noise untill you are tuned in to a station.
(The AUTO MUTING indicator also goes off.)
Reducing the noise of AM (MW)
broadcast
When listening to an AM (MW) broadcast with a lot of noise
interference, you can change the Beat Cut mode to reduce
the noise.
From the remote control ONLY:
Press FM MODE (0) while listening to an AM
(MW) station.
The current BEAT CUT mode appears on the display window.
Each time you press the button, the Beat Cut mode alternates
between “BEAT CUT 1” and “BEAT CUT 2.”
• Choose “BEAT CUT 1” or “BEAT CUT 2” that will give
clearer sound.
ATT
L
LFE
LS
SRS
C R
MPEG
–
2
AAC
DSP
RESUME
TUNED
STEREO AUTO MUTING
RDSTA
NEWS INFO
ATT
RESUME
TUNED
STEREO AUTO MUTING
RDSTA
NEWS INFO
ATT
L
LFE
C R
MPEG
–
2
AAC
CH
RESUME
TUNED
STEREO AUTO MUTING
RDS TA
NEWS INFO
ATT
RESUME
TUNED
STEREO AUTO MUTING
RDS TA
NEWS INFO
CONTROL
–
SUBWOOFER
+
EFFECT
–
CENTER
+
–
REAR-R
+
TEST
SLEEP
TV
VCR
SETTING
TV RETURN
ON
SCREEN
FM MODE
123
456
789
10
0
+10
100+
–
REAR-L
+
DVD
TA/NEWS/INFO
CONTROL
–
SUBWOOFER
+
EFFECT
–
CENTER
+
–
REAR-R
+
TEST
SLEEP
TV
VCR
SETTING
TV RETURN
ON
SCREEN
FM MODE
123
456
789
10
0
+10
100+
–
REAR-L
+
DVD
TA/NEWS/INFO
FM MODE (0)
button
FM MODE (0)
button
EN31-36TH-V70R[B]1 02.3.12, 6:34 PM32