Filter
Top Products
10
VIDEO
S-VIDEO
VIDEO OUT
ANTENNA
DISP.SET
AUX
TO SP-PWV70
IN
AC IN
AV
COMPU
LINK
AM
COAXIAL
75
AM
R
L
HV
FM
EXT
LOOP
DIGITAL IN
OPTICAL
RGB Y / C
AV OUT
AV
RGB Y / C
Connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the component
you are going to connect.
Connecting a TV
To view pictures and on-screen displays, connect a TV to the center unit.
• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.
• You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. See page 62.
7 To connect a TV without the SCART connector
7 To connect a TV with the SCART connector
Connect the center unit’s AV OUT (SCART) connector with your TV’s SCART connector using a SCART cable (not supplied).
• Set the RGB-Y/C selector correctly according to your TV.
–If the TV accomodates the RGB video signal, set the RGB-Y/C selector to “RGB” so that you can enjoy better-quality
pictures.
–If the TV accomodates the S-video signal, set the RGB-Y/C selector to “Y/C.”
–If the TV accomodates the composite video signal only, set the RGB-Y/C selector to “RGB.”
VIDEO
S-VIDEO
VIDEO OUT
ANTENNA
DISP.SET
AUX
TO SP-PWV70
IN
AC IN
AV
COMPU
LINK
AM
COAXIAL
75
AM
R
L
HV
FM
EXT
LOOP
DIGITAL IN
OPTICAL
RGB Y / C
AV OUT
AV
VIDEO
S-VIDEO
RGB Y / C
To composite video input
To S-video input
To SCART connector
NOTES:
• When the RGB-Y/C selector is set to “RGB,” correct video signal is not output from the S-VIDEO jack on the rear panel.
• On the rear panel SCART connector is indicated as “AV OUT.” However, this terminal is designed as video output. So, no sound comes out.
• Whether the RGB-Y/C selector is set to “RGB” or “Y/C,” the composite video signal is always output from the VIDEO jack of the VIDEO OUT.
Video cord (supplied)
S-video cord (not supplied)
SCART cable (not supplied)
If your TV has S-video (Y/C-separation) jack, connect it using an S-video cord.
By using this jack, you can get a better picture quality than using composite video connection.
• Connect S-video cord by matching the ∞ mark on the plug to the one on the system.
Center unit
TV
Center unit
TV
RGB-Y/C selector
Set the RGB-Y/C
selector to “Y/C,”
when connecting
an S-video cord.
EN1-20TH-V70R[B]1 02.3.12, 6:32 PM10