Filter
Top Products
26
Setting the subwoofer
7 Volume control
Adjust the volume of the subwoofer when you feel it is too high or low compared with that of the front speakers.
Turn VOLUME knob.
• The mark indicates the normal volume position.
7 Phase setting
Play sound through the subwoofer and adjust the PHASE button to the position (_ REVERSE or — NORMAL) at which the
lowest frequency is heard best.
NOTE:
Phase is closely related to the distance from the listening position to the front speakers and subwoofer.
While listening, adjust until the lowest frequency is heard best.
7 Adjusting the output level of the subwoofer
You can adjust the output level of subwoofer.
1 Press SOUND.
2 Press SUBWOOFER +/– to adjust the output level of the subwoofer.
• You can adjust the output level within the range from –10 dB to 10 dB.
NOTES:
• You can also change the output level of the subwoofer through the choice menu shown on the TV screen. See page 65.
• Once you have adjusted the output level of the subwoofer, the adjustment is memorized for each source.
Basic adjustment of auto memory
This unit memorizes sound settings for each source:
• When you turn off the power
• When you change the source
When you change the source, the memorized settings for the newly selected source are automatically recalled.
The following can be stored for each source:
• The adjustment of front speakers—Balance, Bass, and Treble (see pages 63 and 70)
• Speaker output level (see pages 39 to 40, 65, and 70)
• Surround mode selection (see pages 39 to 40)
• Effect level (see page 40)
Note:
If the source is FM or AM, you can assign a different setting for each band.
MAX
MIN
VOLUME
Mark
EN21-30TH-V70R[B]1 02.3.12, 6:33 PM26