JVC LVT0865-004A Home Theater System User Manual


 
24
Adjusting the brightness
You can dim the indications on the moving panel and the illumination lamps on the center unit.
From the remote control ONLY:
Press DIMMER.
Each time you press the button, the brightness level of the indications and the illumination lamps changes as follows.
] Dimmer ] The illumination lamps go off ] Nomal level ] (back to the beginning)
NOTE:
The indications on the moving panel do not go off.
Turning off the power with the timer
Using the sleep timer, you can fall asleep while listening to music, and know the system will turn off by itself rather than play all
night.
From the remote control ONLY:
Press SLEEP.
Each time you press the button, the shut-off time changes as follows:
] 0min (cancelled) ] 10min (minutes) ] 20min ] 30min ] 60min ] 90min ] 120min ] 150min
] (back to the beginning)
Example: When “150min” is selected.
To check the remaining time until the shut-off time
Press SLEEP once.
The remaining time until the shut-off time appears on the display window for a while.
To change the remaining time until the shut-off time
Press SLEEP repeatedly.
Each time you press the button, the shut-off time changes.
To cancel the sleep timer
Press SLEEP repeatedly until “0min” appears on the display window.
Turning off the power also cancels the sleep timer.
NOTES:
When DVD is selected as the source to play, this system can also turn off automatically if playback is not restarted within the length of time
you have specified (the auto standby function). See page 66.
When both of the sleep timer and auto standby function are activated, if the shut-off time set by the auto standby function comes earlier than
the one set by the sleep timer, the auto standby function takes effect.
L
R
EN21-30TH-V70R[B]1 02.3.12, 6:33 PM24