Filter
Top Products
53
Music Scan
To find the beginning of a music track during play, use the Music Scan function. Music Scan
searches for blank portions that usually separate selections, then plays the next selection.
Finding the Beginning of the Current Selection —————————————
Press the 1 or ¡ button during play.
❏ Make sure that you press the 1 or ¡ button in the opposite direction to that in which the
tape is playing. Searching stops at the beginning of the current selection, and the current
selection starts automatically.
Finding the Beginning of the Next Selection ——————————————
Press the 1 or ¡ button during play.
❏ Make sure that you press the 1 or ¡ button in the same direction as that in which the tape is
playing. Searching stops at the beginning of the next selection, and the next selection starts
automatically.
Music Scan works by detecting a 4-second long blank at the beginning of each selection, so it will
not work well if your tape has...
• No blank at the beginning of a selection.
• Noise (often caused by much use or poor quality dubbing) which fills the blank.
• Long, very soft passages or pauses in a selection. The scan will detect these as 4-second
long blanks. If this happens, just scan again until you reach the selection you want.
Other Useful Features of the Cassette Deck
❏ Use the auto reverse mode to make the tape automatically reverse at the end of a side and start
playing the other side.
Each time you press the button, the auto reverse mode turns on (the indicator lights up) and
off (the indicator goes off).
❏ Press the DOLBY B NR button to switch Dolby B NR* on (the indicator lights up) or off (the
indicator goes off).
If a tape is recorded with the Dolby B NR system, playing it back with the Dolby B NR on will
reduce tape noise and improve the clarity of the sound.
*Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation.
DOLBY B NR
EN.51-72.CA-MD9R[B]/F 98.2.13, 0:19 PM53