Filter
Top Products
23
3. Press one of the DISC buttons (1 to 3).
The CD and track numbers start flashing.
❏ If the CD and track numbers stop flashing, press the DISC button (1 to 3) again.
4. Press the number buttons to select the tracks.
❏ Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10 then
10. For track 32, press +10 three times, then 2.
The CD and track numbers stop flashing, and the step number is displayed.
5. Repeat steps 3 and 4 to select other tracks for the program.
6. Press the £ button.
The unit plays the tracks in the order you have programed them.
❏ If you try to program a 33rd step, “CD FULL” will appear on the display.
❏ If you try to program a track from an empty tray, or a track number that does not exist on the CD
(for example, selecting track 14 on a CD that only has 12 tracks), such entries are ignored.
❏ You can skip to a particular program step during Program Play. Rotate the MULTI JOG dial
clockwise or counterclockwise on the unit, or press the 4 or ¢ buttons on the Remote
Control.
❏ To play the Program Play repeatedly, press the CD REPEAT button. For details, see “Repeating
a Selection or CDs” on page 24.
To stop playing, press the 7 button.
To exit Program Mode, press the CD PLAY MODE button twice to change to Continuous Play mode
while the CD Player is stopped.
Checking the Program ———————————————————————
While the CD Player is stopped, use the 4 or ¢ buttons on the Remote Control to check the
contents of the program.
Each time you press the ¢ button, the program contents are shown on the display in the
programed order. Pressing the 4 button displays the programed steps in the reverse order.
Changing the Program ———————————————————————
Only possible while the CD Player is stopped.
To delete a program, press the CANCEL button on the unit. Each time you press the button, the last
step is erased.
If you eject the CD, the steps programed from that disc are also erased.
To add a track to the program, follow the procedure above (on either the unit or the Remote
Control). The new tracks are added to the end of the program.
1 2 3
4 5 6
7 8 9
10
+10
EON ON/OFF
PTY SELECT
PTY
SEARCH
TA/NEWS/
INFO
DISPLAY
MODE
DISC DISC DISC
3
2
1
Track
number
Step
number
CD
number
CD
PROGRAM
CD
15
3
2
1
2
1
MD
3
CD
PROGRAM
CD
15
3
2
1
2
1
MD
3
EN.01-24.CA-MD9R[B]/F 98.2.13, 11:46 AM23