Filter
Top Products
22
2. Press one of the CD buttons (1 to 3) to select a CD.
The CD and track numbers start flashing.
❏ If the CD and track numbers stop flashing, press the CD button (1 to 3) again.
3. Rotate the MULTI JOG dial to select a track.
The track number appears on the display.
4. Press the SET button.
The CD and track numbers stop flashing, and the step number is shown.
5. Repeat steps 2 to 4 to select the other tracks for the program.
❏ To select another track from the same CD, repeat steps 3 and 4.
❏ To select another track from a different CD, repeat steps 2 and 4.
6. Press the ‹/8 button.
The unit plays the tracks in the order you have programed them.
Using the Remote Control
1. On the unit, press the CD PLAY MODE button repeatedly until the PROGRAM indicator lights up
on the display.
“CD PROGRAM” also appears on the display.
❏ If you have already made a program, the last step of the previous program is displayed
instead of “CD PROGRAM” unless you have erased the program.
❏ Each time you press the CD PLAY MODE button, CD play mode changes as follows:
= CD PROGRAM = CD RANDOM = Off (Continuous Play) = (back to the beginning)
2. Press the CD button on the Remote Control.
The Remote Control is set to the CD operation mode.
Track
number
CD
number
Step
number
CD
3
CD
2
CD
1
CD
PROGRAM
CD
15
3
2
1
2
1
MD
3
CD
PROGRAM
CD
15
3
2
1
2
1
MD
3
MULTI JOG
SET
CD PLAY MODE
CD
PROGRAM
CD
3
2
1
2
1
MD
3
CD
CD
PROGRAM
CD
15
3
2
1
2
1
MD
3
EN.01-24.CA-MD9R[B]/F 98.2.13, 11:46 AM22