Filter
Top Products
36
One Touch CD Recording (CD REC)
The CD REC function allows you to easily record CDs on the MD1.
1. Prepare CDs and a recordable MD into the MD1 loading slot.
❏ You can load the CDs on any CD trays, but always load the recordable MD into the MD1
loading slot. If not, this function does not work.
2. Be sure that the CD you want to start recording from is selected as the playing source.
❏ If not, select it by pressing the corresponding CD button (1 to 3), then the 7 button.
3. Press the CD REC button on the MD Recorder.
The indicator next to the CD REC button lights up and the recording begins automatically.
Recording will stop when the MD in the MD1 loading slot is fully recorded.
❏ If you press the CD REC button while playing a CD, the recording starts from the beginning
of the current track, and only the current track is recorded.
❏ If you press the CD REC button after making a program, you can automatically record the
program.
Changing the Display Mode—————————————————————
You can check the CD track number and the MD track number while recording.
Press and hold the DISPLAY/CHARA on the unit. While holding the button, the following informa-
tion appears on the display.
To stop recording, press the 7 button.
CD
12345678910111213141516
3
2
1
2
1
3
CD
MD
CD
12345678910111213141516
3
2
1
2
1
3
CD
MD
Remaining time of
the current track
Remaining time
of the MD
\
CD track number currently playing
MD
123456
3
2
1
2
1
3
CD
MD
MD track number currently being recorded
DISPLAY
/CHARA
CD REC
/
EN.25-40.CA-MD9R[B]/F 98.2.13, 0:15 PM36