Filter
Top Products
17
Notes:
• EON data sent from some stations may not be compatible with this unit.
• While listening to a program tuned in by the EON function, the station does not change even if
another network station starts broadcasting a program of the same EON data.
• While listening to a program tuned in by the EON function, you can only use the EON ON/OFF
and DISPLAY MODE button as the tuner operation buttons.
• If the stations alternate intermittently between the station tuned in by the EON function and the
currently tuned station (“WAITING” flashes on the display), press the EON ON/OFF button to
cancel the EON standby reception mode.
If you do not press the button, the currently tuned station is received finally, and the indication
of the EON data type flashing on the display disappears.
When program of the selected EON data is completed, “EON END” appears and the unit
automatically goes back to the previously tuned station.
Alarm Function——————————————————————————
If an ALARM (Emergency) signal is received from a station while listening to the radio, the unit
automatically switches to the station broadcasting the ALARM signal (“ALARM!” will flash on the
display) except when you are listening to non-RDS stations (all AM (MW/LW) and some FM
stations).
Test Function ——————————————————————————
The TEST signal is used for testing the ALARM function.
Therefore it makes the unit work in the same way as the ALARM signal does. If an TEST signal is
received, the unit automatically switches to the station broadcasting the TEST signal (“TEST” will
flash on the display).
EN.01-24.CA-MD9R[B]/F 98.2.13, 11:45 AM17