Filter
Top Products
21
Selecting a Track —————————————————————————
Using the unit
Rotate the MULTI JOG dial while playing or pausing.
• Rotate the MULTI JOG dial clockwise to select the next tracks.
• Rotate the MULTI JOG dial counterclockwise to select the previous tracks.
❏ If you rotate the MULTI JOG dial over the last track of the selected CD, the unit jumps to the
first track of the next CD.
Using the Remote Control
Press the 4 or ¢ button while playing or pausing.
❏ Each time you press the 4 or ¢ button, the track changes by one.
• Press the ¢ button to go ahead one track at a time.
• Press the 4 button to go back one track at a time.
❏ Holding down the 4 or ¢ button allows you to change tracks continuously.
Selecting a Passage within a Track (on the unit only) ——————————
Press and hold the or button while playing or pausing.
• Hold the
button to fast forward the track, and release the button when you reach the
passage you want to hear.
• Hold the
button to reverse the track, and release the button when you reach the passage
you want to hear.
Locating a Track with the Remote Control Directly————————————
Using the number buttons on the Remote Control allows you to go directly to the beginning of any
track.
1. Press the CD button.
The Remote Control is set to the CD operation mode.
2. Press the DISC button (1 to 3) for the CD containing the track you want to listen to.
❏ Example: For the third CD, press DISC 3.
3. Enter the number of the track you want to listen to with the number buttons.
The selected track starts playing.
❏ Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then
10. For track 32, press +10 three times, then 2.
Programing the Playing Order of the Tracks
You can change the order in which the CDs and tracks play. (Program Play)
❏ You can program up to 32 steps in any order from among the loaded CDs.
❏ You can only make or change a program when the CD Player is stopped.
Using the unit
1. Press the CD PLAY MODE button repeatedly on the CD Player until the PROGRAM indicator
lights up on the display.
“CD PROGRAM” also appears on the display.
❏ If you have already made a program, the last step of the previous program is displayed
instead of “CD PROGRAM” unless you have erased the program.
❏ Each time you press the CD PLAY MODE button, CD play mode changes as follows:
= CD PROGRAM = CD RANDOM = Off (Continuous Play) = (back to the beginning)
MULTI JOG
CD PLAY MODE
DISC DISC DISC
3
2
1
1 2 3
4 5 6
7 8 9
10
+10
EON ON/OFF
PTY SELECT
PTY
SEARCH
TA/NEWS/
INFO
DISPLAY
MODE
CD
CD
PROGRAM
CD
3
2
1
2
1
MD
3
EN.01-24.CA-MD9R[B]/F 98.2.13, 11:45 AM21