Filter
Top Products
Menu item
Selectable setting (Initial: [XX])
Display
LCD Type [Negative]: Negative pattern of the display.
Positive: Positive pattern of the display.
Auto: Positive pattern will be selected during the day*5, while negative will
be selected during the night*5.
Contrast Level 01 — Level 15 [Level 09]: Adjusts the contrast of the display to
make indications clear and legible.
EQ/DSP
For settings, ' page 23.
Audio
Fad/Bal *6*7
R6 — F6[0]: Press / to adjust the front and rear speaker output balance.
L6 — R6[0]: Press / to adjust the left and right speaker output balance.
Loud
(Loudness)
Loud1/ 2/ 3: Boosts low and high frequencies to produce a well-balanced
sound at low volume levels.
[Off]: Cancels.
Volume Adjust
Level -5 — Level +5[Level 0]: Presets the volume adjustment level of
each source, compared to the FM volume level. Before adjustment, select
the source you want to adjust. (“FIX” appears if “FM” is selected.)
Subwoofer On/
Off
[On]: Turns on the subwoofer output.
Off: Cancels.
Subwoofer
Level *8
00 — 10[05]: Adjusts the subwoofer output level.
Subwoofer
Phase *8
[0 Deg] (normal)/180 Deg (reverse): Selects the subwoofer phase.
X’over HPF/LPF
For settings, ' page 27.
Beep
(Keytouch tone)
[On]/Off: Activates or deactivates the keypress tone.
Amplifier Gain
Off: Deactivates the built-in amplifier.
Low Power: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[High Power]: The maximum volume level is 50.
Tuner
SSM
For settings, ' page 6. (Displayed only when the source is “FM” or “HD
Radio”.)
Area Change
(Frequency
tuning interval)
[US]: For North/Central/South America, AM/FM intervals: 10kHz/200kHz.
EU: For any other areas, AM/FM intervals: 9kHz/50kHz.
SA: For some South American countries, AM/FM intervals: 10kHz/50kHz.
IF Band
(Intermediate
frequency band)
[Auto]: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Sirius ID The 12-digit SIRIUS identification number appears on the display. (Displayed
only when SIRIUS Satellite Radio is connected.)
Blend Hold
For settings, ' page 8. (Displayed only when the source is “HD Radio”.)
Stereo/Mono Displayed only when the source is “FM” or “HD RADIO”.
[Stereo]: Enables stereo FM reception.
Mono: Improves the FM reception but stereo effect will be lost.
Radio Timer
For settings, ' page 7.
*5 Depends on the <Dimmer Set> setting.
*6 If you are using a two-speaker system, set the fader level to “0”.
*7 This adjustment will not affect the subwoofer output.
*8 Displayed only when <Subwoofer On/Off> is set to <On>.
Menu operations
ENGLISHޓ|
29
2012/3/22ޓ10:43:57KW-R900BT_J_EN