Filter
Top Products
Using the Settings menu
1
Enter the “Hands-Free” menu.
2
Select <Settings>.
To return to the previous menu, press .
To exit from the menu, press MENU.
3
Repeat this step to perform the necessary
settings.
The following settings are applicable to the paired device. If another device is paired, perform the
settings again.
Menu item
Selectable setting (Initial: [XX])
Phonebook
Select *
[In Phone]: The unit browses the phonebook of the connected phone.
In Unit: The unit browses the phonebook registered in the unit. (You can copy
the phonebook memory using <Phonebook Trans> (' page 30).)
Auto Answer On: The unit answers incoming calls automatically.
[Off]: The unit does not answer incoming calls automatically.
Ringing Tone [In Unit]: The unit rings to alert you when a call/text message comes in.
– Call Tone: Select your preferred ring tone (Tone 1 — 5) for incoming calls.
– Message Tone: Select your preferred ring tone (Tone 1 — 5) for incoming
text messages.
Default ring tone is different according to the paired device.
In Phone: The unit uses the connected phones’ ring tone to alert you when a
call/text message comes in. (The connected phone will ring if it does not
support this feature.)
Ringing Color
Color 01 — 29[06]: Select your preferred color for incoming call/text message
alerts.
Off: Cancels.
NR/EC Mode [On]: Turns on the Noise Reduction and Echo Cancellation of the connected
microphone for clearer sound.
Off: Cancels.
MIC Setting
Level (01— 03)[02]: The sensitivity of the microphone increases as the MIC
level is increased.
Message Notice
[On]: The unit rings and “[Device Name]”#“Received Message” appears to alert
you of an incoming text message.
Off: The unit does not alert you of an incoming text message.
* Selectable only when the connected phone supports PBAP.
Bluetooth mobile phone
20
|ޓENGLISH
2011/12/30ޓ15:27:57KW-R900BT_J_EN