Filter
Top Products
Advanced operations [ See page 22 for button locations. I
• DSP
• STADIUM
STADIUM mode adds clarity and spreads the sound, like in an
outdoor stadium,
• All Channel Stereo
All C'hannel Stereo (ALL ST) mode can reproduce a larger stereo
sound field using all the connected (and activated) speakers.
All Channel Stereo can be used while reproducing 2 channel stereo
source.
Normal stereo sound All Channel Stereo
%¢
• Indicatorsonthedisplaywindow
Digital signal format indicators
PPCM: Lights when DVD AUDIO packed PCM signals
conies in.
LPCM: Lights when Linear PCM signal comes in.
DE D: Lights when Dolby Digital signals come in.
1_: Lights when DTS Digital (Surround) signals come
in.
No indication: No digital signal indicator lights when analog
signals come in.
Dolby Surround mode indicator
lqrl PLII: Lights when Dolby Pro Logic II mode is activated.
Surround indicator
SURR: Lights when the surround mode is activated.
Source signal indicators, etc. SW _ l_J
Light to indicate the incoming signals. _ [_! 117411]_
: Lights when the left channel signal comes
in.
: Lights when the center channel signal comes in.
1Nl: Lights when the right channel signal comes in.
: Lights when the LFE channel signal comes in.
I1_ : Lights when the surround left channel signal comes in.
17g=l: Lights when the surround right channel signal comes in.
Ik'RI: Lights when the monaural surround channel signal or 2
channel Dolby Surround signal comes in.
SW : Always lights.
The channel with" --" shows tha the corresponding speakers are
reproducing the channels' sound.
If the channels' sound decoded into 5.1 channel is reproduced, only
"_" lights.
Selecting the surround mode
The system is set up to automatically select the optimal surround
mode lbr input signal from digital multichannel software.
When playing back a 2 channel source, you can select the desired
surround mode manuall,_
IMPORTANT
Be*bre using the remote control *br the fbllowing
operation;
• Set the remote control mode selector to AUDIO.
AUDIO _
• When playing backdigital multichannel s0ftware (except
while OFFisselected)
The appropriate multichannel surround mode (Dolby Digital, DTS
Digital Surround or Linear/Packed PCM) is automatically sdected.
• Whenplayingbacka2channelsource
You can select either Dolby Pro Logic II (MOVIE/MUSIC) or the
DSP mode.
Press SURROUND repeatedly to select the
desired mode•
The surround mode is turned on and the current surromM mode
appears on the disphLv window.
Each time you press the button, the surround mode changes.
For details on each mode, see "Available Surround modes l\_r each
input signal". (See page 22.)
To turn off the surround mode
Press SURROUND repeatedly until "OFF"
appears on the display window•
Storing adjustments -- auto memory
When you turn the power off, the system memorizes the current
surround mode. The memorized mode is automatically recalled
when you turn the power on.
NOTE
• For a down mixing prohibited DVD AUDIO disc, the system
continues to output multLchannel signals with "MULTI CH" shown
on the display window even if the surround mode is turned offduring
playback. On the other hand, the system outputs only the fi'ont left
and right channel signals with "LR ONLY" shown on the display
window when you start playback with the surround mode having
been set to "OFF" or "H. PHONE".
• For ASF, MPEG-2, MPEG-1 and DivX (except DivX version 6), the
surround mode takes no eI]t}cts.
You can check disc infbrmation and you can use sonre functions
using the on-screen bar.
Showing the 0n-screen bar
• Whenever a disc is loaded
Press ON SCREEN•
Each time you press the button, the on-screen bar
changes as fbllows on the TV screen.
Exanaple: During DVD VIDEO playback
OFF
(The on-screen bar disappears)
+
(back to the beginning)
• The currently selected item shows green.
23