JVC TH-C20 Stereo System User Manual


 
Playback
The icon such as [] shows the disc *brmats or file types the
operation is available fur.
IMPORTANT
Be_re using the remote control _r the
following operation;
1 Set the remote control mode selector
to AUDIO.
2 Press DVD or USB MEMORY.
DVD
AUDIO_
E:_ USB
MEMORY
I The buttons described below are used on pages 17 to 21. I
DISC
Number
buttons
TOP MENU/
Cursor
(m,.I._l.lA)l
ENTER
USB
DVD MEMORY
,_ __ _ , USB
MEMORY
T0playa disc
Press the desired DISC (1-5)
on the center unit.
The system turns on and the disc tray comes
ont.
2 Placea disc•
Label side up When placing an 8 cm disc
Remote
control mode
selector
MENU/PL
3 Press DISC (1-5), with SHIFT pressed•
NOTE
Up to 5 discs can be loaded.
You can also start playback by pressing I,- (play button) or DVD.
The system plays back available discs sequentially until you stop
pla}4_ack or until the disc loaded on the DISC 5 tray reaches to the
end. However, when DVD VIDEO or DVD AUDIO is loaded in the
system, pla}Gack of the disc next to the DVD VIDEO or DVD
AUDIO will not start.
T0playa fileina USBmassstorageclassdevice
Press USB MEMORY•
The operations of the files in a USB mass storage class device
depend on the file types stored in the device.
FL DISPLAY
SHIFT --
GROUP
SHIFT
II
l,,-
(play button)
TITLE/
GROUP
For MP3/WMA files
The file control display (see page 26) appears on the TV screen.
For JPEG files
Each file (still pictures) is shown on the TV screen fur about 3
seconds (slide-show). When stopping playback, the file control
display (see page 26) appears on the TV screen.
For ASF/MPEG-2/MPEG-I files
Pressing TOP MENU/PG or MENU/PL shows the file control display
(see page 26) on the TV screen during playback.
For DivX files
During the readout time, "READING INDEX" may appear on the
TV screen.
Pressing TOP MENU/PG or MENU/PL shows the file control display
(see page 26) on the TV screen during playback.
NOTE
When several types of files are recorded on a disc/device, select
appropriate file type on the set up menu. (See page 34.)
T0pauseplayback
Press II.
To continue playback, press I,_ (play button).
Tostop
Press II.
NOTE
(For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
17