Filter
Top Products
Connections [ Donotconnectthepowercorduntilallotherconnectionshavebeenmade. ]
Note that the illustration below is for SP-PWC30.
I Before connecting the speaker cords;
Twist and pull the insulation coat offand remove.
Powered subwoofer
TH-C30:SP-PWC30
TH-C20:SP-PWC20
Front speakers
TH-C30: SP-THC40F
TH-C20: SP-THC20F
@ @
Speaker cord
Connect the black cords to the black (0) ternfinals.
Connect the white cords to the (@) terminals
referring to the table below:
FRONT SPEAKERS (LEFT)
FRONT SPEAKERS (RIGHT)
CENTER SPEAKER
SURROUND SPEAKERS (LEFT)
SURROUND SPEAKERS (RIGHT)
White
Red
Green
Blue
Gray
Centerspeaker
TH-C30:SP-THC40C
TH-C20:SP-THC20C
CAUTION
• If you connect speakers other than the supplied ones, use speakers of
the same speaker impedance (SPEAKER IMPEDANCE) indicated
near the speaker terminals on the rear of the powered subwoofi:r.
• DO NOT connect more than one speaker to one speaker terminal.
• When installing the satellite speakers on the wall;
- Be sure to have them installed on the wall by qualified personnel.
DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from fhlling off the wall due to incorrect
installation or weakness in wall structure.
Care must be taken in selecting a location for speaker installation
on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.
÷
Surround speakers
TH-C30:SP-THC40S
TH-C20:SP-THC20S
÷
Precautions for daily use
• When moving the speakers, do not pull the speaker cords;
otherwise, the speakers may _:allover, causing damage or injur?_
• Do not reproduce sounds at so high a volmne that the sound is
distorted; otherwise, the speakers may be damaged by internal
heat buildup.