JVC GVT0131-010A Stereo System User Manual


 
35
Timer Operations
Setting the Timer
Using Daily Timer, you can wake up with your favorite
music. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast automatically.
You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
one of Daily Timers or Recording Timer at the same time.
To exit from the timer setting, press CLOCK/TIMER as
required.
To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1
Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, Daily 3 ON time, or
Recording Timer ON time.
When the clock has not been adjusted, pressing
CLOCK/TIMER makes the System enter the clock
setting mode.
2
Make the timer setting as you want.
Repeat the following operations until you finish setting in
the following order—
1
Set the hour then minute for on-time.
2
Set the hour then minute for off-time.
CLOCK/
TIMER
STANDBY/
ON
SET
CANCEL
,
Remote control
Timer initial settings when shipped from the factory:
DAILY 1:ON Time (6:00)/OFF Time (8:00)/
Source (TUNER FM 1)/Volume level (– –)
DAILY 2:ON Time (12:00)/OFF Time (14:00)/
Source (TUNER FM 1)/Volume level (– –)
DAILY 3:ON Time (18:00)/OFF Time (20:00)/
Source (TUNER FM 1)/Volume level (– –)
REC TMR:ON Time (8:00)/OFF Time (10:00)/
Source (TUNER FM 1)
Remote
ONLY
CLOCK/
TIMER
DAILY 1
ON (Time) ON (Time) ON (Time)
ON (Time)
DAILY 2 DAILY 3
REC TMR
Clock setting
(see page 19)
Canceled
Daily 1 Timer Daily 2 Timer Daily 3 Timer
Recording Timer
1
123
4
5
Ex. When Daily Timer 1 setting mode is selected
SET