Filter
Top Products
13
Listening to the Radio
To select the AM tuner interval spacing
Some countries space AM stations 9 kHz spacing, and other
countries use 10 kHz spacing.
You can change the AM tuner intervals while the System is
on stand by and the last selected source is AM.
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
•
When you repeatedly press the button, the frequency changes
step by step.
To stop searching manually,
press either button.
If the received FM station is hard to listen
The MONO indicator lights on the display.
Reception will improve though stereo effect is
lost—Monaural reception mode.
To restore the stereo effect,
press the button
again (the MONO indicator goes off).
To preset the stations
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
• You can also store the monaural reception mode for FM
preset stations if selected.
2
Activate the preset number entry mode.
• Finish the following process while the indication on the
display is flashing.
3
Select a preset number for the station you store.
4
Store the station.
To tune in to a preset station
1
Select the band (FM or AM).
2
Select a preset number for the station you store.
•
You can also use the
1
/
¡
button to select a preset
station.
Remote control:
Main unit:
DISC3
DISC4
(at the same time)
(at the same time)
FM
AUX
AM
GROUP/TITLE
2 sec.
2 sec.
Remote
ONLY
FM/PLAY
MODE
REV.MODE
Examples:
To select preset number 5, press
5.
To select preset number 15,
press +10, then 5.
To select preset number 30,
press +10, +10, then 10.
Remote
ONLY
SET
123
4
5
ST
AUDIO ANGLE
SUB TITLE
ZOOM VFP
DVD LEVEL3D PHONIC
PA GE +PA G E
-
1
4
7
10
2
5
8
3
6
9
10
123
4
5
ST
SET
123
4
5
ST
Remote
ONLY
FM
AUX
AM
AUDIO ANGLE
SUB TITLE
ZOOM VFP
DVD LEVEL3D PHONIC
PA GE +PA G E
-
1
4
7
10
2
5
8
3
6
9
10