Filter
Top Products
– 21 –
2
Press PTY.
“PTY SELECT” starts flashing in the main display.
3
Press PTY SELECT + or PTY SELECT – to select a PTY
code while “PTY SELECT” is flashing.
• Each time you press the button, the PTY codes
change as follows (refer also to the list on page 23):
None “News “ Affairs “ Info “
Sport “ Educate “ Drama “ Culture “
Science “ Varied “ Pop M “ Rock M “
Easy M “ Light M “ Classics “
Other M “ Weather “ Finance “ Children “
Social “ Religion “ Phone In “ Travel “
Leisure “ Jazz “ Country “ Nation M “
Oldies “ Folk M “ Document “ TEST “
Alarm! “ (back to the beginning)
4
Press PTY again.
While searching, the selected PTY code appears and
“SEARCH” flashes in the main display.
The unit searches 30 preset FM stations, and stops
when it finds the one you have selected, and tunes into
that station.
To continue searching after the first stop
Press PTY again while the indications in the main display
are flashing. If no program is found, “NOT FOUND”
appears in the main display and the unit returns to the last
received station.
To stop searching any time during the process
Press PTY while searching.
Ex. When “Info” is selected
Switching to a Program Type of Your Choice
Temporarily
The Enhanced Other Networks function allows the unit to
switch temporarily to a broadcast program of your choice
(TA, News, and/or Info) from a different station except
when you are listening to a non-RDS station—some FM
stations and AM (MW/LW) stations.
• This function only works while receiving a preset RDS
station sending the data required for this function.
On the remote control ONLY:
1
Press RDS CONTROL while listening to an FM
station.
2
Press TA/News/Info repeatedly until the Enhanced
Networks data type you want is selected.
The name of the selected Enhanced Other Networks
data type —TA/News/Info—lights up on the display.
TA : Traffic announcement
News :News
Info : Programs the purpose of which is to impart
advice in the widest sense.
All off : The Enhanced Other Networks function is
canceled.
• Each time you press the button, the data types change
as follows:
TA = News = Info = TA News =
News Info = TA Info = TA News Info =
All off (canceled) = (back to the beginning)
The indicator(s) corresponding to the selected data type
lights up on the display.
To cancel this function, press TA/News/Info repeatedly
so that the TA/News/Info indicators all go off.
• If you cancel this function while receiving a program
selected by this function, the unit goes back to the
previously tuned station.
TA/News/Info indicators
STEREO
News
TA
Info
AAC128
EN17-23_NXHD10R[B]f.pm6 02.6.24, 9:00 AM21