Filter
Top Products
– 57 –
6
Press ENTER to finish the current title entry.
The next title entry screen appears.
•
For the disc title:
The track title entry screen for the track 1 appears.
•
For the track title:
The next track title entry screen appears (or the unit
exits from the title entry screen if the current track is
the last one on the disc).
•
For the group title:
The next group title entry screen appears (or the same
screen still remains if the current group is the last one
on the disc).
If you want to go on assigning a name, repeat steps
3
to
6
.
7
Press CANCEL to exit from the title entry mode.
• When recording, do not go to the next step until the
recording ends.
8
Press MD 0 on the main unit to eject the MD.
“WRITING” and the MD REC indicator flash while the
editing you have made is being recorded on the MD.
5
Enter characters.
1) Press DISP/CHARA to select the character set
you want.
• Each time you press the button, the character set
changes as follows:
2) Press the character entry button for a character
you want to input.
Ex.:
• To enter an “A” or “a,” press ABC once.
To enter a “B” or “b,” press ABC twice.
To enter a “C” or “c,” press ABC three times.
• To enter a symbol, press MARK repeatedly until
the mark you want appears.
• To enter a numeral, press 0 – 9.
• To enter a space while entering a title, press
twice.
• To move the character entry position while
entering a title, press or *.
• If you have entered an incorrect character, press
or to select the character you want to
correct, then press CANCEL to delete it.
* If you press repeatedly during recording, the
entered characters may be displayed incorrectly. In this
case, press TITLE/EDIT or GROUP TITLE/EDIT, then
repeat from step
2
again.
3) Repeat steps
5
– 1) and
5
– 2) to enter other
characters.
• If the character you want to enter next is assigned
to the same button you have just pressed in step
5
– 2), press once to move the character entry
position to the right.
• The main display can only show 6 characters at a
time. If you enter the 7th character, the first
character disappears, and so on.
Capital letters &
Symbols
Small letters &
Symbols
Numerals
EN56-58UX-Z7MD[A]f 02.7.31, 21:2957