Filter
Top Products
– 25 –
To go to another track
Press ¢ or 4 repeatedly.
• ¢: Skips to the beginning of the next or succeeding
tracks.
• 4: Goes back to the beginning of the current or
previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
To change the information shown in the main display
On the remote control ONLY:
Each time you press DISP/CHARA, the information in the
main display changes as follows:
While playing or pausing:
When the MD recorder stops:
About MD indicator
To prohibit disc ejection—Disc Lock
You can prohibit disc and MD ejection from the unit and
can lock discs.
On the main unit ONLY:
To prohibit disc ejection
Press REV.MODE while holding 7 when the unit is in
standby mode.
“LOCKED” appears in the main display for a while, and
the loaded discs (both disc and MD) are locked.
If you try to eject the locked discs
“LOCKED” appears to inform you that the Disc Lock is in use.
To cancel the prohibition and unlock the discs, repeat
the above procedure.
“UNLOCKED” appears in the main display for a while,
and the loaded discs (both disc and MD) are unlocked.
Programing the Playing Order of the Tracks
—Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
On the remote control ONLY:
1
Load an MD.
2
Press MD 3/8, then 7.
The source is changed to “MD.”
3
Press PLAY MODE repeatedly so that “MD
PROGRAM” appears in the main display.
The PRGM (program) indicator lights up on the
display.
• Each time you press the button, play mode changes
as follows:
An MD is
loaded
During
playback
During
pause
MD PROGRAM
MD RANDOM
MD GROUP
Normal play
4
3
5
Clock time
1
2
3
2
1
4
Clock time
*1
When the current track does not belong to any groups or when
the disc has no group, “– –” will appear.
*2
When the current track or the disc has a title, its title will appear
for a while.
*3
When the group has no title, “NO TITLE” appears.
1 Current track No.
2 Current group No.
*1
3 Recording length mode
and elapsed playing
time
*2
1 Total track No.
2 Total group No.
*1
3 Total playing time
*2
4 Remaining recording time
4 Current group title
*3
5 Remaining recording
time
EN23-28UX-Z7MD[A]f 02.7.31, 21:2425