Filter
Top Products
– 26 –
If you try to program a 33rd step
“MEMORY FULL” will appear in the main display.
If the total playing time is 150 minutes or more
The total playing time will not be shown. (“– – : – –” will appear.)
Playing at Random—Random Play
The tracks of the loaded MD will play at random.
On the remote control ONLY:
1
Load an MD.
2
Press MD 3/8, then 7.
The source is changed to “MD.”
3
Press PLAY MODE repeatedly so that “MD
RANDOM” appears in the main display.
The RANDOM indicator lights up on the display.
• Each time you press the button, play mode changes
as follows:
4
Press MD 3/8.
The tracks are played at random.
Random play ends when all the tracks are played once.
To skip the playing track, press ¢.
• You cannot go back to the previous tracks by pressing
4.
To stop during play, press 7.
To exit from Random play mode, press PLAY MODE
repeatedly so that the unit enters another playback mode
(Group play, Normal play or Program play mode) before or
after play.
4
Press the number buttons to select the tracks.
• For how to use the number buttons, see “To go to
another track directly using the number buttons” on
the previous page.
5
Press MD 3/8.
The tracks are played in the order you have programed.
Program play ends when all the programed tracks are
played once (when Repeat play is not activated).
To stop during play, press 7.
The last programed track number and total playing time
appear in the main display.
To exit from Program play mode, press PLAY MODE
repeatedly so that the unit enters another playback mode
(Random play, Group play or Normal play mode) before or
after play.
To check the program contents
Before playing, you can check the program contents by
pressing ¢ or 4.
• ¢: Shows the programed tracks in the programed order.
• 4: Shows them in the reverse order.
To modify the program
Before playing, you can erase the last programed track by
pressing CANCEL on the remote control. Each time you
press the button, the last programed track is erased from the
program.
To add tracks in the program before you start play,
simply select track numbers you want to add.
To erase the entire program, press MD 0 to eject the MD.
• Turning off the unit will also erase the program.
If your entry is ignored
You have tried to program a track that does not exist on the MD
(for example, selecting track 14 on an MD that only has 12 tracks).
Such entries are ignored.
RANDOM indicator
The recording length mode
of the current track
Elapsed playing
time
The current track No.
MD PROGRAM
MD RANDOM
MD GROUP
Normal play
The current group No.
PRGM indicator Step No.
Total playing time
The last programed
track No.
Ex.: 7 tracks have been programed.
EN23-28UX-Z7MD[A]f 02.7.31, 21:2426