Filter
Top Products
– 39 –
4
Press ONE TOUCH TAPE REC on the main unit.
The recording starts and the REC indicator starts
flashing on the display.
• When you select a track by pressing ¢ or 4
before pressing ONE TOUCH TAPE REC, recording
starts from the selected track (except when Program
play mode is selected).
• When recording an external equipment, start
playback after “AUX = TAPE” appears in the
main display.
To stop recording, press 7.
To record a single track of a CD/MD during play
On the main unit ONLY:
While playing back a disc track or an MD track you
want to record, press ONE TOUCH TAPE REC.
The playback of the track is stopped, and the same track
starts playing from the beginning again. This time, the
cassette deck starts recording the track.
• After the track is recorded, both playback and recording
stop automatically.
When you press ONE TOUCH TAPE REC while
pausing a track
Recording starts from that point.
To change the information shown in the main display
On the remote control ONLY:
Press DISP/CHARA.
• Each time you press the button, the information in the
main display alternates between the recording indication
and the clock indication.
When recording a disc or an MD
• A 4-second blank is automatically made on the tape before each
track. To record without the blank, press CD 3/8 or MD 3/8
twice in step
1
, then press ONE TOUCH TAPE REC.
• When the front side of the tape ends in the middle of a track, the
recording on the reverse side starts from the beginning of that
track (if the reverse mode is set to ).
However, if the front side ends within 12 seconds from the
beginning of a track, recording on the reverse side starts from
the previous track.
Recording onto a Tape
You can use only type I tapes for recording.
1
Prepare the source to record.
To record a disc:
Prepare a disc.
After placing a disc, press CD 3/8, then 7 to change
the source to “CD.”
• You can make a program (see page 21) or select
Random play mode (see page 22) if you want.
To record an MD:
Prepare an MD.
After inserting an MD, press MD 3/8, then 7 to
change the source to “MD.”
• You can make a program (see page 25) or select
Random play mode (see page 26) or Group play
mode (see page 27) if you want.
To record FM/AM broadcasts:
Press FM/AM (or FM/AM/AUX on the remote control)
to select either “FM” or “AM,” then tune in to a preset
station you want.
• For more detailed operations, see pages 17 and 18.
To record external equipment:
Press AUX/DVD (or FM/AM/AUX on the remote
control) to select “AUX” and prepare the external
equipment to play.
• Adjust the audio input level if necessary (see page 32).
• For operation of the external equipment, see the
manuals supplied with it.
2
Put a recordable cassette into the cassette holder.
3
Press REV.MODE to select a reverse mode.
• Each time you press the button, the reverse mode
changes as follows:
* will be shown during recording when you
select .
Recording on
one side.
Recording on
both sides once.
*
EN33-40UX-Z7MD[A]f 02.7.31, 21:2639