Filter
Top Products
SETUP
JBL Synthesis
3-36
REAR L/R THX 80Hz, NONE
Opens the REAR SPEAKERS menu shown above, which can be used
to activate and deactivate the Main Zone audio output
connectors labeled Rear L/R. When set to 80Hz, the SDP-5 activates
these connectors and configures all Main Zone audio output
connectors for a JBL Synthesis 7-Channel speaker setup. When set
to NONE, the SDP-5 deactivates these connectors and configures
the other Main Zone audio output connectors for a JBL Synthesis
5-Channel speaker setup.
Note:
When the REAR L/R parameter is set to NONE:
• Dolby Digital Surround EX, THX Ultra2, THX
Surround EX, and dts-ES decoding are not
available.
•The ASA parameter is not available.
REAR L/R
SYNTHESIS 7CH SETUP
SPEAKERS
SETUP
JBL Synthesis 7-Channel Speaker Setups (continued from page 3-35)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7CH SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
80Hz 80Hz
80Hz 80Hz 80Hz
80Hz 80Hz
80Hz
L
M
SUB
R
C
SL
SR
RL
RR
SYNTHESIS 7CH SETUP
SYNTHESIS 7CH SETUP
!CAUTION!
PRESSING THE V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A
SYNTHESIS
7CH SPEAKER
CONFIGURATION
REAR SPEAKERS
80Hz
NONE
SYNTHESIS 7CH SETUP
FRONT L/R* 80Hz
CENTER* 80Hz
SIDE L/R* 80Hz
REAR L/R 80Hz
SUBWOOFER* 80Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
* These parameters cannot be
adjusted.
The SYNTHESIS 7CH SETUP menu THX ULTRA2 SUB, BGC, and ASA
parameters are identical to the CUSTOM SETUP menu THX
ULTRA2 SUB, BGC, and ASA parameters. When one of these
parameter settings is adjusted on one menu, it is automatically
adjusted on the other menu at the same time. Refer to pages 3-33
and 3-34 for these parameter descriptions.
REAR L/R 80Hz