Filter
Top Products
Basic Operation
JBL Synthesis
2-18
If the STATUS menu includes a second page, the PG1 indicator
appears in the top-right corner of the menu. While the Shift
command bank is activated, press the Stat button to open the
second page. If the STATUS menu does not include a
second page, pressing the Stat button closes the menu. If this
occurs, begin again with step 1.
3. When the desired STATUS menu page has been opened,
release the Shift button to deactivate the Shift command bank.
Then, press the remote control Menu and arrows to scroll
upward and downward through the complete list of
parameters available on the current page. When the Shift
command bank is activated, the Menu arrows cannot be
used to scroll through STATUS menu parameters.
Note:
STATUS menu parameters provide information about
the current input source and listening mode. These
parameters cannot be adjusted.
4. Press the Stat button or the Menu arrow to close the
STATUS menu. If the second page of the STATUS menu opens,
press the Stat button or the Menu arrow again to close the
STATUS menu.
All STATUS menus are shown at the right. STATUS menu
descriptions begin on the next page. The table beneath each
description lists the default and possible settings for each
parameter. STATUS menu parameter descriptions begin on page
2-22. STATUS menu level meters are described on page 2-23.
2CH STATUS
INPUT
MODE
INPUT TYPE
SAMPLE RATE
L C R SL SR SB LFE
X X X XXX X
5.1a BYPASS STATUS
INPUT
MODE
INPUT TYPE
2CH BYPASS STATUS
INPUT
MODE
INPUT TYPE
DIGITAL STATUS
INPUT
MODE
INPUT TYPE
SAMPLE RATE
0
-6
-15
-30
-45
dB
%!D STATUS PG1
INPUT
MODE
CHANNELS
BIT RATE
EX ENCODING
LCRSLSRSB LFE
XXXXXX X
0
-6
-15
-30
-45
dB
DTS-ES STATUS PG1
INPUT
MODE
CHANNELS
BIT RATE
ESI ENCODING
LCRSLSRSBLFE
XXXXXXX
0
-6
-15
-30
-45
dB
%!D STATUS PG2
SAMPLE RATE
2.0 ENCODING
DIALOG OFFSET
MIX ROOM
CENTER MIX LVL
SURR MIX LVL
DTS-ES STATUS PG2
WORD LENGTH
SAMPLE RATE
STATUS menus