Filter
Top Products
SETUP
JBL Synthesis
3-18
Note:
When the INPUT SELECT parameter is set to AUTO,
the SDP-5 will not select the assigned analog audio
input connector when a valid digital audio input
source is present. Some DVD and CD players output
digital signals (data) when the player is paused or
stopped or when the player is powered on and the
disc drawer is empty. When this occurs, the SDP-5
automatically selects the assigned digital audio input
connector.
INPUT SELECT DIGITAL, ANALOG, AUTO
Controls the interaction of the digital and analog audio input
connectors assigned for the selected Main Zone input. The INPUT
SETUP menu can be used to assign one digital and one analog
audio input connector for the selected input. Refer to pages 3-7
and 3-8 for more information.
When the Shift command bank is activated, the remote control 7/5
button can be used to adjust the INPUT SELECT parameter, cycling
through the DIGITAL, ANALOG, and AUTO settings.
The table shown on the next page describes INPUT SELECT
parameter settings.
INPUT SELECT
MAIN ADVANCED
DVD1
INPUTS
SETUP
MAIN ADVANCED (continued from page 3-17)
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
MAIN ADVANCED
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
INPUTS DVD1
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
DVD1 MAIN ADV
INPUT SELECT DIGITAL
2-CH ANLG BYP OFF
S-VIDEO 16:9 AUTO
S-VIDEO OSD 4:3 ON
COMPONENT OSD OFF
INPUT SELECT DIGITAL
DIGITAL
ANALOG
AUTO