JBL Home Theater System Home Theater System User Manual


 
MODE ADJUST
JBL Synthesis
5-8
Please note the following about dts NEO:6 listening mode
activation:
The dts NEO:6 listening modes cannot be assigned as the
preferred listening mode for 2-channel sources. However,
when the 2-CH parameter is set to USE LAST, the SDP-5 will
automatically activate a dts NEO:6 listening mode if a dts
NEO:6 listening mode was activated the last time a 2-channel
source was present.
The SDP-5 will not automatically activate the dts NEO:6
listening modes unless a 44.1 or 48kHz PCM digital source is
present. The dts NEO:6 listening modes are not available with
88.2 or 96kHz, Dolby Digital, or analog sources.
The dts NEO:6 MUSIC listening mode can be activated with
the front panel or remote control Mode and buttons. The
dts NEO:6 FILM listening mode can also be activated with the
remote control dts button when a 2-channel input source is
present.
dts NEO:6 FILM
Designed for playback of matrix-encoded digital stereo film
sources.
Derives six channels when both side and rear speakers are
present (rear channels will be in parallel). Derives five channels
when only side or rear speakers are present. The subwoofer
channel is generated through bass management in the SDP-5.
Option/
Parameter
OUTPUT LEVELS
CUSTOM
Listening mode menu option and parameter descriptions begin on page 5-28.
dts NEO:6 MUSIC
Designed for playback of matrix-encoded digital stereo music
sources.
Derives six channels when both side and rear speakers are
present (rear channels will be in parallel). Derives five channels
when only side or rear speakers are present. The subwoofer
channel is generated through bass management in the SDP-5.
Option/
Parameter
OUTPUT LEVELS
CUSTOM
Listening mode menu option and parameter descriptions begin on page 5-28.
MODE ADJUST dts neo:6 FILM
MODE ADJUST dts neo:6 MUSIC