Filter
Top Products
M2 User Manual
11
Better Picture
If your TV has an S-VIDEO input, you will get a better picture quality
using an S-VIDEO cable (not included) to connect.
Make sure that the system is set to interlace not P-SCAN. Composite
video out will not work if the system is set to P-SCAN
• Press ANGLE/P-SCAN repeatedly until P-S disappears from the display.
Set video out to S-VIDEO using on-screen setup:
1) Press SETUP
2) Use to select PREFERENCES
3) Press ENTER
4) Use to select VIDEO OUTPUT
5) Press ENTER
6) Use to select S-VIDEO
7) Press ENTER
Best Picture
If your TV has component video inputs, you will get the best
picture quality using a component video cable. Be sure to
connect RED to RED, WHITE to WHITE and YELLOW to YELLOW
Set video out to COMPOSITE (YCBCR) using on-screen setup:
1) Press SETUP
2) Use to select PREFERENCES
3) Press ENTER
4) Use to select VIDEO OUTPUT
5) Press ENTER
6) Use to select YCBCR
7) Press ENTER
Good Picture
For good picture quality, use a composite (RCA-type, included) video
cable to connect.
Make sure that the sP]TJ.4409>.