Filter
Top Products
- 5 -
Connection
Caution: Please turn off all the equipment power before connecting.
Connect to the TV
Connecting diagram
Safety precautions
Some settings should be made for the unit
according to the TV connection.
* According to the colour system setting of TV,
select the colour system in the “TV Display”
function setting.
* If the unit is connected to a wide screen TV, then
set the “TV display” to “Wide” in the function
setting menu.
* If the unit is connected to a TV, then set “TV
display” to “Normal/PS” or “Normal/LB” in the
function setting item.
Connecting the Speakers
Connect the speaker cords between the terminals
as shown below.
Connect the cords with a silver line to the (+) (L) (R)
terminals and cords with a gold line to the (-) (G)
terminals.
Connection precautions
1. This unit has a high power output and wide
dynamic range. If speakers other than those
supplied are used, they must be chosen
according to speaker specification, or the
speakers may be damaged.
2. Before connecting or removing mains power,
please turn off the power on the unit and turn
the volume to minimum or it may damage the
speakers.
Connecting the Antenna
C
OAXIAL
OPTICAL
D
IGITALOUTPUT
V
IDEO
MONITOR
C
ONTROLCABLE
VCRSCARTINPUT
TVSCARTOUTPUT
D
VDS-VIDEO
Terminal board for the DVD player
Connections to TV
TV
* The antenna should be connected to the antenna socket, tighten the
antenna by hand with tool supplied. (Please note: Do not overtighten,
this could damage the antenna or it’s fittings.)
* Position the antenna for the best reception.
Warning: The antenna supplied has a magnetic base. It must not be
placed on any products that are sensitive to magnetism, such
a TV’s and computers as this may cause damage.
Tighten the antenna rod
clockwise on the base of
the antenna.