Filter
Top Products
- 4 -
DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids,
such as vases, to be placed on the equipment and don’t handle the power cord with wet hands.
DON’T place hot objects or naked flame sources such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and lead to fires.
DON’T use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety always
fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is
designed for unattended operation or has a stand-by mode. Switch off using the switch on the
equipment and make sure that your family knows how to do this. Special arrangements may
need to be made for infirm or handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is
damaged in any way - switch off, withdraw the mains plug and consult your dealer.
…………………………….
ABOVE ALL,
NEVER let anyone especially children push anything into holes, slots or any other opening in the case
- this could result in a fatal electrical shock;
NEVER guess or take chances with electrical equipment of any kind…it is better to be safe than sorry!
…………………………….
* Before operating this system, check the voltage of this system to see if it is identical with the voltage
of your local power supply.
* Unplug the system from the wall outlet if it is not used for a long time. To disconnect the cord, pull it out
by grasping the plug
* To avoid electric shock, do not open the cabinet.
* There are no user serviceable parts inside. In case of system failure, unplug the power cord and
consult your dealer
* Do not place this unit on an unstable or sloping surface. Ensure good ventilation surrounding the
product. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths,
curtains, etc.
* Do not place this unit close to strong magnetic field.
* Don’t place this unit close to dampness, or the moisture will affect the life of the laser head.
* If the system is brought directly from a cold to a warm location, or is placed in a very damp room,
moisture may condense on the lens inside the player. Should this occur, the system will not operate
properly. Remove the disc and leave the system turned on for about an hour until the moisture
evaporates.
* Should any solid object or liquid fall into the system, unplug the system and have it checked by
qualified personnel before operating it again.
* Do not use attachments not recommended by the product manufacturer as they may cause hazards.