Filter
Top Products
- 24 -
WMA files “can” have DRM protection. In this case the file content is encrypted with a key. For
playback and decoding it is necessary to have DRM license files on your computer. DRM
license can limit your rights for using these functions. For instance, it can allow only play-
back and prohibit conversion into other formats. When you download music from the internet
sites that require you to pay per song, these licenses may be included with the download.
In order to play these encrypted WMA files in your MP3 player, you will need to use the
Windows Media player to copy them to your MP3 player. The traditional “Drag & Drop”
method will not work. Here is what you have to do:
- Open your WMA file using your Windows Media Player.
- Click “Copy to CD or Device”
- Select the MP3 player as your device.
If you don’t have a windows media player or if your version of windows media player is
outdated, you can download the latest Version for free from microsoft’s website:
http://www.microsoft.com/windows/windowsmedia/download/
Please note:
1. The capacity of the hard disk is 40GB and divided into two 20GB disk prartitions C:\ &D:\.
2. If the capacity of your file is over 20GB, you have to respectively copy your file to C:\ & D:\.
3. In order to protect the hard disk and prolong its life, please take care to stop play before
changing funtion, and do not turn off the unit when hard disk is playing.
4. Avoid sharp impacts to the unit.
Clock/Timer Functions
Setting the Clock
The built-in clock shows the correct time in the display.
- Press the clock button (CLOCK) twice (press once in standby mode), hour indicator will
blink.
- Set the hour with the
C button or D button.
- Press the clock button (CLOCK), minute indicator will blink.
- Set the minute with the
C button or D button.
- Press the clock button (CLOCK), the built-in clock starts operating and the seconds start
counting from 0.
Note:
* The operating time of every step shouldn’t be longer than 3 seconds or it will return to the
original display.
* If there is a power failure or the power system is turned off, the clock will lose its setting.
To confirm the clock time
When you press the clock button (
CLOCK), the clock time is displayed. Wait for a few
seconds until the display returns to the original display.